I acquired this MB frame/GPW tub back in August of 2022 and it's been moved to a few different places for safekeeping until I wanted to fool with...
If anyone has a line on Jackman 16.5" 8x6.5 wheels I'd appreciate it. Looking for 4 of them. Thanks
I traded some labor for this ol workhorse and revived it. The truck was strictly used for hauling a bulldozer and tractors for farm work. A...
For now, the plan is to make it driveable. Reckon I'm a glutton for punishment and somehow always seem to choose the worst candidates to...
@jeepstar asked for a few pictures of this FC. It is a one owner rig bought brand new in 1958 somewhere in California. It lived on a ranch until...
This salad 3A is for my buddy Eric. Pretty much we (I) will be building this out of the scraps left over from the 3B revamp. Should make for a...
Guess I'll put everything here... I've been trying to find a 6.2 or 6.5/NV4500 4x4 truck for a few years and never could find one near me but very...
It's not much but I managed to piece together a fairly decent air compressor for less than $400. Got the 5hp motor and 120 gallon tank for free,...
I started collecting some stuff a couple years ago. Ideally, I'll have enough tooling in the future so I don't have to rely on borrowing other...
After this past summer's wheeling adventures I figured it was time to make a few small changes. Overall, it's not too bad for a cheap knockoff....
I went to look at potential Jeep parts and found this welder in a barn. $20. Yea it's in my dining room. :) Hopefully, it will work again. Back...
This will be a very slow process of me buying parts and then installing them at one time for the most part. What I have is an 07 JK Rubicon with...
Upon further reading, I found that this Warn 6014 is also referred to as the "8200" and it's truly a rare & oddball specimen. Here are a couple...
I'm starting to look into winches and most are 21" long or more. I have a solid 16" (best fit) to 18" of useable space to mount a winch. I also...
This has been an ongoing battle and I'm at wits' end. No bubbles in the radiator while running, no milky oil, no major leaks (radiator has...
I've been looking for an affordable (cheap) lathe to modify a distributor and other things. My issue is I don't know what these are worth and I...
Any tips for welding overhead with a mig? I turned my wire speed way down but still get big drips.
I measured the lip of the carburetor air horn and it's an oddball size. (2.784"/70mm) Has anyone used something other than the stock jeep air...
I've been using a $40 ebay welding hood for a few years and it was just ok for occasional welding. It's useless for anything but welding since the...
I found a drawing online of an 8274 but I want to confirm. Is the front to back (depth?) 8.5"? I need to make sure I leave room for a winch; more...
Separate names with a comma.