Pile of parts showed up yesterday. My Goat clutch housing. The clutch fork is a GM 60s-70s part. Looks just like a Goat clutch fork so maybe I'm...
I am much aware. I have one on the tractor already too. I’d hate to run through a fence :lol:
Things I don't necessarily need but I just couldn't pass up on the deals. I bought a running 52 Ford 8N a few weeks ago to play with. Came with a...
Gave the transmission a rattle can rebuild. I honestly didn't see any reason to tear it apart. Just a wee bit of overspray to clean up because my...
It's been a very long day. Test fit the adapter to the SM420. Seems to go together just fine. [IMG] I spent the majority of the day working...
Dug out the D18 and D20 and managed to tear down the D20 this evening. Still waiting on a few things before I can try to start the 3-53. [IMG]...
Started to tear into the SM420. Looks pretty good for 1961! Went ahead and ordered the Novak SM420/D20 adapter. The plan is to use my spare D20...
Took some time this weekend to crack open the 3-53. Now, I'm not an expert on the 2 stroke Detroits but I have done enough machine work on them to...
Yessir, the head is cast iron. I do believe it's around 1000 lb.
Picked up an air horn, fan, and two spin on style fuel filter heads. Bought a NOS pressure plate and v belt tensioner from ebay. I'll be tearing...
Yep I have a bell housing for it.
Well, here it is! [IMG] [IMG] Got the 3b involved to move the engine around. [IMG]
Well today I bought an aluminum block 3-53 Detroit 2 stroke and sm420 from a gamma goat for the 3b’s next great makeover. I’m thinking about a D18...
Thanks! I completely ripped off itlksez 3b for the most part and have slowly morphed it into how I want it, more or less. Buick V8 hei...
Probably the picture but anything is possible.
Wanted to go for a drive and brave the 45°F chill. Haven't driven down the road since I made the new driveshaft so I wasn't sure if it was going...
Back on the hunt.
I've never used the rubber packing on the rear main seals. Just filled the holes up with RTV and haven't had any problems.
Thank you sir! I’ve contacted the seller to try and figure out logistics.
After two months of being broken, I finally got the rear driveshaft parts and welded it up tonight. Modified the traction bar.... just imagine a...
Separate names with a comma.