I replaced master cylinder, 4 wheel cylinders, lines, hoses and front shoes. Everything bleeds right and all shoes are adjusted. After driving...
I'm working on a '75 project with a tub that is beyond even thinking about saving. There havn't been many solid intermediate tubs in the northeast...
Is there any way to tell if this is an "original" jeep 15x8 wheel from the renegade era? Patrick posted a picture of his and they have a...
On my 66 the PO gave me a web strap and said it was the original hold down for when you put the windshield down. But there isn't any way to...
I got a rebuild kit from Novak for my T86 and a lot of the parts are wrong. wrong bearings wrong gasket/seal set I called and no problem taking...
Are there any V6 Tuxedo Parks out there? With a 66 Tux V6 did it still have a column shift? Was it a side shift T90 instead of T86? Was the...
My T86 is missing one of the shifter rail plugs and leaks a lot. Is there a source for the plugs? Tom
My buddy just picked up a '75 today from the original owner. He got the bill of sale and the buyer paid an extra $29.90 for a "heavy duty frame"....
Where have you sourced good quality clutch parts for Dauntless equipped jeeps? Close to stock strength is good enough. Any "made in USA"? Tom
Most T90's that I have driven are silent with clutch in or clutch out. This T86 has a little bit of noise (like running water) when the clutch is...
I looked at a '75 today and dont know much about the Intermediate CJ5's. But the thing that caught my eye was the 4-speed trans and the...
Does anyone flat tow their ECJ5 with an S-10 2 door Blazer with 4.3? Is there enough power and stability? The S-10 weighs in at about 3300 lbs so...
How much clearance should there be between the driveshaft and bellhousing near the starter when sitting flat and level? I can see that mine has...
I rebuilt my heads and have put about 20 minutes on the engine. It all sounds good with just a little sewing machine ticking. I lifted the valve...
Ok the searches of the site confirm that the early 66 came with a bracket bolted to the snubber on the transfer case. The snubber is too far to...
I see a valve cover decal that is green-white-red with black "Dauntless" for sale: http://www.bearcreeksurvey.com/NOSRepro.htm My 66 has a...
I got my 66 about a year ago and it had been stored on blocks for 20 years. To bring it back to life I cleaned up the fuel system and ignition....
I throught I had a boiling problem with my Dauntless. There are heavy bubbles that I can feel and hear in the upper radiator hose and heater...
When the 66 Dauntless is up to temp there is a sound like someone hitting the intake manifold with a small hammar and I can feel the knocks at the...
I'm going through my '66 and fired it up today hoping that it was ready to run. But I think I have an over heating problem and need help trying...
Separate names with a comma.