I am pretty sure that will fit either side Front dump on LH and rear dump on RH
I am in the process of an SM420/Dana 18 conversion. I have rebuilt the tranny and now redoing the transfer case. In all my years of putting things...
I have an oil bath on my 2G and do not have a spacer. I do have an electric choke though.
V8 in a pre 72 is not really worth the effort if you already have the Dauntless. Just my opinion. As for the tranny; 4 speed with a granny gear...
Make sure when you replace the intake manifold hex head inset bolt closest to the distributor where the grinding needs to be done it has a flat...
Thanks for all the replies. The twin stick on the big hole is what I was leaning to because I know the big hole does not need to be rebuilt. I...
I am already prepared for the floor cutouts as I have a new replacement transmission tunnel which I have not installed due to knowing I will be...
I am in the process of installing an SM420 behind a 225 dauntless. I have already rebuilt the tranny. There is currently a large hole D18 transfer...
I own a 1965 with an original V6 and mine has vacuum wipers.
Just what I wanted to hear. Much thanks
Thanks for the info. What I really need to know is if the 67 top cover is interchangeable to the 56?
I purchased 3 transmissions which the seller claimed, 1 is good, 1 needs rebuild, and 1 for parts. 2 have the ribs on the passenger side with one...
Table saw, it takes less than a careless second to wish you were using one of these. SawStop 10'' Jobsite Saw PRO Expensive but SAFE. How much are...
My vote would be number one with the Dauntless
I like the original look with better braking, steering, 4 speed granny gear tranny and HEI. Maybe better looking wheels and tires. Just my 2 cents.
https://www.summitracing.com/parts/ict-sam-53 Wider than you want but most likely the tallest narrowest.
Wasillishack I hope everything goes well for you. Many good posts here. That being said, MY restoration process is in order of importance, get it...
I have been a carpenter for so long I did not know what a nail gun was when I first started. That being said, I've used just about all of them. My...
I do not know what your situation is but on my dauntless V6 I had to use a double groove pulley on both crank and ps pump, with the ps pump only...
After 60 years of living, I often wonder why reasonably intelligent people do so many stupid things. Me most of all.
Separate names with a comma.