Not mine, but less than 20 miles from me. Marketplace - Buick Fireball V6 225 3.7 Jeep Dauntless and ST300 Super Turbine 300 2 speed automatic |...
Tell me what you think. I have a line on a Dodge 4wd NV4500 with an AA Atlas/Dana300 adapter on it. It does have a stock 29 spline output shaft in...
I don't have a need for these at the moment, but I couldn't pass them up. I will be swapping them onto different rims when they I find a home for...
Does a complete 11" AMC 20 drum assembly swap onto a CJ Dana 44, backer plate and all? Has anyone ventured down this path?
Found a Thermal Dynamics Cutmaster 52 for $800. With 10 extra tips and electrodes along with a few other consumables. [ATTACH] [ATTACH]
Picked up a Darex M1 drill bit sharpener off Marketplace this past week. Now to find a good place to put it and print a manual. [ATTACH]
Has anyone done the vinegar in the radiator to clean the whole system? What % along with mixture ratio was used? My YJ build has a copper brass...
I was getting some exhaust noise coming back threw the carb and the power seemed to be a bit down. So after pulling the valve covers I found a...
I have always assumed they are interchangeable between the 232 and 258. But the knowledge here is to great to not ask for the truth. Reason being...
Well back at it again. On the last day of EJS I heard a noise in the front drive line of the jeep about half way up Moab rim. After getting it...
Now that the rockers have been taken care of onto the next project. Time for some new upper shock mounts. [ATTACH] Something like this [ATTACH]...
Rocker panels were looking pretty rough so It was time to cover them up and add some strength. This is what I came up with. Now just to pull them...
Dug threw my pile of parts and found a spare 18 along with the correct Bronco 20 gear to get 2.52 low range in my 20. Have to wait till next...
Well not real cold, it was about 15 above yesterday and I loaded the night before and hauled the jeep about 2 hours away to play in the snow. Upon...
And 13 1/2" of clearance. [ATTACH] [ATTACH]
The motor gave up the ghost and I always wanted a variable speed one but they are not cheap. So I pick up a treadmill off the local free adds and...
For the Moab trip this year, the wife said she would like more than the standard hoop. So I built this. [IMG] [IMG] [IMG] [IMG]
Gona look nice on on my 225 with my Dual Port 360 [IMG] It will make this look a little better. Next maybe something different for an air...
[ATTACH] Made a new glove box for the 5. It turned out pretty good and has much more room at 11" deep.
[ATTACH] Nice little unit I found at a swap meet a few years back[ATTACH]
Separate names with a comma.