who knows, just gonna have to brake them in. Shoes are Raybestos box even says official Nascar product. But when you check the fine print they are...
No, I have the bigger wheel cylinders. I pulled one of drums, brake shoes surfaces are not yet making full contact with drums yet, gonna have to...
Hey Farfle I do believe that you are correct. I installed both new drums & shoes. Check out the attached pic's. You can clearly see how much of...
OK, I don’t mean to be a pest but driving a Jeep is new to me (check out my “Maiden Voyage” post) Anyway, I tried some panic stops at about 40...
Thanks John I feel better now. I never driven anything like this in my life, it's takes a little getting used to. Before I converted the steering...
Yes, shoe's & drums are new
Steering box is new. Tie rods & ends new & rebuilt knuckes. No drag link it's now cross steer with pitman arm...All brake parts new no...
After two years of work I took the maiden voyage in my ‘71 CJ5 today. Please keep in mind that I have never ever driven a Jeep before, so I have...
I think I found the problem. Sender has two posts. One is a screw post with an insulator between it and the tank. The other is a tacked on tab...
Now It's Getting Weird Re: Best Way to Ground Fuel Tank Tried grounding tank, no change...Heres where it gets strange, reading taken at sender is...
OK, new tank, new sender & new gas gauge. Needle pegs @ full.:( OHM reading on sender wire is only 2 ohms. When I put the tank in I upgraded to a...
Thanks:)
Quick question. Installed a 12" 1650cmf pusher fan that draws 7 amps. Instructions say it should be connect to a 30 amp fuse (no problem there) I...
If the battery has a bad/dead cell it won't charge.
Got good & tired :evil: of messing around with the Delco 10dn & various voltage regulators & still no charge to battery:dead horse:...Finaly gave...
OK, have Delco 10 dn alternator... voltage regulator is marked F,2,3,4 I know that F & 2 attache to the alternator, 4 goes to the Alt light on...
After two year of work I’ll finally to the point of having a running JeepR) It started 1st try & runs well with no leaks & I have not even checked...
Core size on mine is 22x17
My '71 came with a 5 blade
I'm in the process of installing this harness right now. Very pleased. Excellent instuctions & quality. I don't know how they sell for that price
Separate names with a comma.