This may be in the wrong forum, but it is from a 68 model year so here goes: I could use a little help identifying the 'red' and 'gold' colors...
I am cleaning up the body on the 68 J2000 that I picked up from Hazel in the late 2000's. It only ever had a mirror on the drivers side and...
Mine finally broke beyond use. What have you guys found to be the best replacement switch? I scoured this forum and came up with the Standard...
My son was driving my 86 CJ7 down the hwy moving along about 65mph in 5th gear when all the sudden the motor just revved up like it had popped out...
All the data plates and build stickers are missing. Title says it's a 71, vin indicates mid 70 build date. There is a current Commando on Ebay...
I recommend safety GOGGLES or a face shield when cutting steel with a jigsaw, not the safety glasses, even the wrap around kind. Today I was...
The question that needs some good opinions and answers. I'm going to replace the outer u-joints on my front D30 since the axles are out. The...
Is it possible to change out a side bearing on a Dana 30 case without mucking up the backlash setting? I pulled the case out so I could install a...
Speaking about the inability to obtain parts for the intermediates.... Anyone know where I can find a replacement rubber grommet that goes on...
Well, 6 holes actually. On my 74 rig with the 258 motor I removed the air pump and air injection assembly. I don't want to get a different exhaust...
Anyone know the wall thickness used in the tubing on these roll bars for the intermediates? [IMG] If I heard right they are an aftermarket...
Will a roll bar out of a 69 CJ5 fit into a 74 cj5? Or will there need to be many modifications? I know these intermediates are difficult to deal...
I've been watching this thread http://www.earlycj5.com/forums/showthread.php?t=66382 about fitting a roll bar into a Commando and I too need to...
I'm thinking about finding a Dana 30 front axle to swap out the D27 that's in there now. What is going to be the best years to find the closest...
I know it's taking me forever to finish this task of putting power steering on my 71 Commando, but now that I've finally gotten around to getting...
I didn't want to muddy up the vin sticky thread so here it is: It seems that the vin stickers are gone on this one, but here it is from the...
Separate names with a comma.