FWIW https://www.facebook.com/marketplace/item/1064379631447514/?ref=search&referral_code=null&referral_story_type=post
Sent you a pm..........
FWIW...
And a load of other serious antiques. Local bad deal in action....
Similar to that one, yes.
No salt water in Nebraska. One of our bigger lakes is just down the road, several dead boats on this place. The V-6 is about Buick blue and the...
About a week ago I was on a property that is being cleaned up, lots of junk around. I bought a BMW R60 and two Honda trail 70's and left in the...
My '66 is 206K, screwed on, with an A.
The body has seen some things. What is the deal with the bead along the bottom of the tub?
[MEDIA]
Anybody have experience with a vapor hone? They appear to be the hot set-up for aluminum parts. I am kinda' wanting to buy one, the closest shop...
Okay, sorry it took me so long. The old timing lights with the thumbwheel and a little meter or the ones with a knob on the back that let you move...
How many of you guys know how to check for a worn or defective camshaft using a timing light?
When did they go from the cast hinges that bolt to tool box to the tube style mount? The '71 I had used the tube.
Thank You. I'm pretty sure you are correct. I didn't think it would move that far out of whack but it looks like the windshield could move back...
I've got a '50 3a with a Koenig full top, it sits on the Jeep about right but the front edge of the top is about one inch too high on the...
Will 2a and 3b front springs interchange? Thanks
Yeah, the only reason to remove the side cover to set the intakes is so you can tell what position the valves are in, but it's easier to determine...
I did not mention guessing at anything. 1/2 turn is 180 degrees. You fire one cylinder every 180 degrees. If you set one cylinder at TDC, the next...
Take the top cover off, get the cylinder you are adjusting at TDC of the compression stroke and adjust the intake valve for that cylinder, then...
Separate names with a comma.