never mind....
A buddy helped me out last night and did all the welding, helped me with the angles etc... here is the plan. I have 3 backing plates, 1/4inch...
how hard is it to shorten full width axles? Looking at a set of matching Dana60's, much to wide for the YJ but the price is right.
I will be cutting some welds off for the first time this weekend. Looking for tips... A 3/4" thick plate about 4'' by 6'' is currently welded...
anyone here made or driven a jeep with a bicycle break used as a throttle mounted to the manual shift stick?
My CJ stalled twice last night when I was wheeling. The first time I was in a mud hole so deep with only the right tires that water was just...
Everytime I go for a drive with my cj it idles fine while warming up but gets starved for air at high RPMS and sputters. To get home I end up...
I have a 3spd is it a T14 or T15? What the significance of the number? Would I have a Dana 20 Transfercase? How can I tell if they are...
My jeep Idles a little fast so I tried to slow it down... Now it starts fine and idles a little slower but If I breifly hit the throttle its...
I dont know anything about rim size vs. tire size. what size rims do I need for my 75' cj5 running 31X10.5. bolt pattern? all I know about my...
I snapped the shock mount off the u bolt plate.. From pic its supposed to be another 2 inches longer Where can I find one of these? Should I...
I am going to see a second local fabricator today about a new rear bumper.. Should I bolt it to the frame?? or There is a 4inch tall...
I am lifing my jeep this week... Do I need new bushings for my Shocks and Springs? my kit only came with bushing for my shocks. Do springs...
I have to take the lower bumper off to get to the bolts on the shackles out for my lift kit. and while its off I would like to make it more...
'75 Cj5... I did some searching and never found a post that talked about this.... I am thinking about adding a 2.5 inch lift to my CJ. If I...
'75 Cj5... I had original lock-o-matic front manual hubs on. I ruined one and ordered new Warn hubs from Car Quest. The original 6 bolts that...
'75 CJ5 I have a leak on the rear end behind the lright rear backing plate. It is not coming from the brake cyliner or hoses. it looks like...
Is this the correct ignition for my '75 CJ5? It looks like my harness will plug right in, but hard to tell from the pics.... If you are looking...
'74 232.... I know I can adjust the choke by loosening 3 screws and turning the choke coil/cover on the carb left or right. If I position it...
The PO of my '74 232 engine converted the choke to manual and drilled the dash. grrr. for some reason i prefer things to work as designed. the...
Separate names with a comma.