Just thinking about it now. One set of my stands dont have the quick release lever system. they have a series of holes drilled that your push a...
:shock: very glad you are OK. I have spent a bit of time under my jeep(s) on jackstands
never mind....
A buddy helped me out last night and did all the welding, helped me with the angles etc... here is the plan. I have 3 backing plates, 1/4inch...
Nice Trailer!
getting excited is going to be really expesive for ya now :roll:
been calling around for an 8.8 in 4.11 +Limited Slip and a 4cyl YJ Dana 30 with 4:10. had a 8.8 on the hook with 3.55s but will be much easier to...
ahhh my wallet! I found a matching pair with 4:10's for $200. that really the only reason I was interested. figured I would need to go to...
how hard is it to shorten full width axles? Looking at a set of matching Dana60's, much to wide for the YJ but the price is right.
I will be cutting some welds off for the first time this weekend. Looking for tips... A 3/4" thick plate about 4'' by 6'' is currently welded...
anyone here made or driven a jeep with a bicycle break used as a throttle mounted to the manual shift stick?
Just a thought.... I still have all of my stock YJ Shackles. which should be longer than your CJ shackles.... they are just gathering dust....
Caster angle.... Thanks. I was typing more and thinking less.
I think he is refering to the center brace on the shackles themselves. Mine are bolted in the front. and bolted in the rear. I took a piece of...
Shackes can mess with the camber I believe. If the steering Geometry is set up correctly a vehicle wants to go straight down the road. Shackles...
I can find and directions on posting to the classifieds. where do I start?
Go skinny, I regret 33x12.5's
I noticed the same thing with the carter on my 232. when i switched to a manuel choke I almost never need to use it unless I was out in snow.
I would start with the idle mixture and put a new air filter on (these are simple and in expensive places to start). lean it out then recheck mpg....
I have a spare manual choke kit with all the parts. pay shipping and its yours. it was on my jeep when I bought it. I tore it off and went...
Separate names with a comma.