hello! I am looking to replace my clutch before I put the engine back in... can anyone suggest one to go with the following: AMC 360 (30...
Good Day all! is there a difference between the Dana 20 and the Dana 300 skid pans? I am pretty confident that i have a T-150 with a Dana 20...
Hey all- I am in need of a column for my JEEP... 76 CJ5/360/3spd I would like to get a tilt and don't want to do a bunch of fab work to get...
Hey all- I got a new PV for my CJ... its a GM style... the fitting on the valve that goes to the rear brake line is a 9/16-18 female and the...
hey all- finally got an excellent 76+ frame to replace my 75- below frame for the JEEP... bought the Pro Comp 4" leaf lift to go on it, but I...
Hey all! heres a question that has me stumped... if I want to add a captive nut to replace the body mounts on my tub (underneath, of course) but...
hey all... can someone please tell me what size the bolts are that go in here? this is a 1975 frame and PS steering box i tried my thread...
]I was doing some light reading last nite about some ignition upgrades and such... and since my engine will be 'new' when it comes back, I was...
hey all! so I took my engine into the shop for the re-build and the guy tells me that the AMC split bore 4bbl intake I have is pretty rare/hard...
Is there a difference in the proportioning valves for 4-Drum brakes vs disc/drum set-ups? I used to be 4-drum but now, I have discs, and need a...
Morning All- heres a dumb question... I have a 75 frame and a 76 tub... the engine is from the 76 as well (a 360)... will the engine...
will someone please post either some GOOD pix (print or photo) of the way the 3 speed (76 CJ5) goes back in? its been SO long since I took it...
Hey guys! after a year off from building, its time to light the fires and put some air in the tires... 1976 CJ5, on a 75 Frame... im in...
hey all! i wanted to try to start my wifes 79 JEEP but since the transmission is out and gone (bought it that way) theres no place to mount the...
dont want to hijack the thread, but since we re on the topic... my T150 is in the beginning stages of a rebuild... i have it apart and all the...
mornin all! i searched the previous threads on this, but didnt find what i was looking for, so i have a question i have converted to 85 CJ7...
Hey guys- i dont know if this is really the correct forum, so if it isnt, would the moderators kindly move it? my rotisserie is 1/2 complete...
Hey Guys- i just bought a 79 with a 360... but no tranny/TC... could you give me some ideas that will work for replacements? please...
i KNOW this sounds stupid, but i cant seem to get the pan to line up... maybe its because the pan is from a 76 and the frame is a 75? is there...
After much internal debate and SO many words of encouragement for the fine folks here... i have decided to keep the JEEP... i did some work on it...
Separate names with a comma.