How far are you towing it? If you are going more than a few hours, and can do it, pull the drive shaft. I have always just left it in neutral,...
which E3 are you running? I looked before but didn't see a match.
If you can get a cj6 in good shape go for it. They are less common and get lots of comments. mine has the oddfire. runs fine, but also has 10...
I see one on ebay listed under M38A1 Cover, Hood Breather Tube Hole - $28
I picked mine up on ebay for about $15. the replacement hood I got for my 66 was from a 65 that had the snorkel cutout.
My plan is to go through the cap. Already drilled out the old cap. Haven't installed it or sealed the vent yet. Didn't want to drill and tap...
Thanks for the info. Probably more than I want to tackle at this time.
Reading all the 4 speed swap posts this week so when I came cross T18 in the local CL I took a look. Guy is selling a T18 from a 70s...
Thanks for the help on the wires. picked up some straight tubes, with the connections on them at the parts store for $6. will bend them up...
I decided to replace the MC with a stock replacement, put new brake shoes, rebuild the wheel cylinders and replace the rubber lines. Also picked...
I was looking for one the other day too. Not because of a dent, but when I went to change the oil you could push the bottom of the pan up and...
Ok, thanks for the suggestions. I haven't pulled the wheels off yet to inspect the shoes and cylinders.
Degreased and power washed the Jeep this weekend. Gave me a chance to see where my leaks were coming from. One looks to be where the speedo...
Separate names with a comma.