Unlimited 200™ Professional Multiprocess Welder with 120/240 Volt Input The specs seems good for the price, and consider I don't need it all that...
Does anyone have a parts diagrams for the adjusting hardware on a 1971 cable clutch? This is the long style cable (~58" cable) with no bell...
I'm replacing the steering box on my jeep and I wanted to check what the proper fluid is for an intermediate. Currently I've got it filled with...
Hi guys. I finally got the am465 into my jeep, and got it started for the first time today. Everything seems ok, except the clutch won't...
Good morning. I've got a question for you. I'm now grappling with the trans cross-member for my sm465 swap. With the D20 clocked in the...
more than a few of you guys own these things, I'm sure. I'm looking at compact tractors in the 25hp range. I didn't realize how many options...
I'm having a #*%$&@ of a time getting my jeep back together I'm mating a sm465 to a 304 using the novak bell, pilot bushing, and adjustable...
Ok, I recently saw an article about a particularly stubborn axle nut:...
Good morning Jeepers. AMC 304 circa 1972 I'm in the process of replacing my clutch and trans. When I removed the flywheel bolts, it appears...
Just what it says above. My rear springs are a bit bent, and a bit undersized for the weight of the hardtop. I see a set of 7 leaf front springs...
I've got a broken centering pin on my cj5's leaves. I can't for the life of me remember what size the pin/bolt is. 3/8" 5/16" could'nt...
really havent been using it at all lately. Toying with the idea of building a more family friendly Wagoner or K5 blazer. I know I'm not going to...
Due to packaging/space constraints I'm considering mounting my power steering cooler partially or completely above the level of my pump/reservoir....
I've never done a trans swap before... This is an Sm465/D20 to my existing 304 using a novak adapter bell housing, and and AA 465 to d20 kit....
I parked my jeep about a month ago, running fine, good oil pressure, a healthy 304 by all measures. My dad moved it, and left the key on, and...
A after getting the lower shaft and gears in. I looked at the schematic and I forgot #41. how critical is that? Is it worth taking it back...
http://www.novak-adapt.com/catalog/sm465_parts.htm in this diagram part #s 35 and 33 ( Bushing, mainshaft journal ) how do I get these...
I feel like a dumbarse because i searched, read 12 threads, and stillcouldnt quite put together the information I'm looking for. If I twin...
I'm not sure how to get the main shaft out. front bearing retainer removed, rear yoke and tailshaft housing removed and I've got all the...
Hey guys, I've got a line on an SM465 with the Advance adapter for the D18/D20's. It also looks, from the Novak-adapt site that It can be...
Separate names with a comma.