Not sure if it's me or the forum, but I searched to no avail. After another wheel bearing failure on my Dana 25 (just swapping in old used parts...
Started a thread over at Pirate on the Willys forum but the postal has no love. So, I bought this 1970 AMC postal jeep. Mostly because I am...
15 years ago I got a REALLY rusty POS '74 CJ5 from a buddy. Motor was locked up and the swapped in Dana 27 was blown up. (Dana 27?) But the price...
Looking at a T18/Dana 20 from a '79 Cherokee. This has the LONG input shaft and wally adapter between the case and the bellhousing. Is it possible...
I'm the proud owner of a 1970 DJ5 with a locked up 153 and a powerglide. Rear diff tag is 3.73 and "use limited slip diff fluid only". I bought it...
I swapped out the converted 24v distributor on my A1 to use regular plugs and wires. I swapped in a WWII distributor that I had on the shelf, but...
I'm helping a buddy work on a 69 CJ-5 and we're doing brakes. Bought all new stainless lines from Classic Tube. BUT, they don't match his exactly....
Searched to the best of my ability and read through probably two dozen different 30 swap threads without finding for sure. I have a '79 disc...
Anybody interested in adding a limited slip to your 19 spline Dana 44, www.overstockdiffparts.com has one on clearance for $257. Summit lists in...
Looking at maybe buying this Craigslist trans. http://austin.craigslist.org/pts/3579826468.html I need a T15/Dana 20 for my '75 project and this...
I'm playing musical jeeps with a bunch of parts I have. I have a '79 CJ-5 with the stock AMC 20 rear axle and 3.54 gears. I also have a drum brake...
I had started a build thread years ago but failed to deliver. I'd been asked about my build so thought I would do a synopsis. Craigslist buy I...
For 3.92 and up with 19 spline axles. $287 is a good deal for someone looking to add a positrac. They have for 3.73 and down also....
Sorry if this is an Repost, but check out the before and after dyno test of L head high compression head installation. 25% increase in torque!?...
Put 10 miles or so on the A1 this weekend mild offroading and it runs great. 2nd gear low range is ideal for cruising the pasture. First gear in...
I finished the wiring on my A1 and am ready to start the fuel system. I have a new steel fuel tank and have run new steel fuel lines. I have a...
With the Dana 18 starting to howl in my MB, I am contemplating getting a later model version to swap in for more low range. Would an M38A1/CJ-5...
OK, I know I've got a partial thread, but from here on I'm going to document my work from go. Here is the jeep when I got it. Gotta' love the...
Making progress. I've got the suspension done all the way around and the rear axle rebuilt. Front axle is next as the seals and kingpin bearings...
OK. Looks like this is the way to go to get a 4 speed pretty cheap and more power. I've searched the site and the web and have come up with some...
Separate names with a comma.