hey guys im wanting to swap a 96 4.3 out of an s10 into my cj. i did get the harness but man their is alot going on there. im thinking of buying...
hey guys, i hope this is the correct area for this post if not just move it. i have a 74 cj6 that i am wanting to swap a fuel injected 4.0...
hey guys im sure this has been discussed several times but after searching threads i really couldnt find much on the subject. so my question is...
hey guys ive got a 74 cj5 with a front dana 30 and drum brakes. aside from swapping discs from a newer dana 30 or buying a 600 dollar kit...
hey guys ive got a 304 in a 74 cj. it has an edlebrock intake, other than that it is stock. i had a 500 cfm edelbrock on it but it spit and...
hey guys ive got a 73 cj5 i am putting back together. all the brake components are new. i have bled the system a few times but still dont seem...
ok guys i am building a 74 cj5. i swapped the front discs on just like in the article in the technical library. all the lines are new and the...
hey guys i have read the info on springs in the technical library but still have some questions. if any of you have any experience with this i...
hey guys i am thinking about swapping a 4.1 buick v6 into my cj5. does anyone have a link for a flywheel. did this engine ever come with...
hey guys i have seen several 5's with the door openings enlarged like a 7. how do you go about doing this? any special tricks? i see that...
hey guys i remember seeing an article in jp? several yrs ago about the holbrook long leafs and have heard mention of them here but where can a...
ok guys i cannot make my ebrake work. i have a 73 cj5. i am in the process of assembling everything and since i want to put a cage in it i...
ok guys i need a favor. i am building a cj6 and do not yet have a top. i want a bestop (because they are the only manufacturer i have found,...
ok guys ive got a gm column out of 94 truck. i am installing it in my 73 cj5. everthing is good except the column sticks down towards the...
ok guys i currently have two seats out of a honda prelude 95' and a fixed rear bench from a cj7. they are both black but do not match. covers...
hey guys i am looking for the e brake release cable. for my 73 cj5. any links? tia jeep
hey guys, i am getting ready to mount the tail lights and reverse lights on my 73 cj5. i bought the factory replacements from 4wd hardware....
i am starting to think about brackets for my cj6 tub. i have aftermarket seats so i plan on building my own brackets. on my 5 i had a full...
hey guys. i just got my fiberglass tub. for a 74 cj6. my concern is (i have read about this also) the body is not indented for the windsheild...
hey guys, i am looking for dana 20 shift linkages for my 73 cj5. i havent found anyone yet that sells them. any help would be appreciated. oh...
Separate names with a comma.