Ok. Thanks!
I believe it's the stock tank, but the Jeep has been repainted, and it looks like the tank got painted too. So it might have disturbed the good...
Hey guys. My fuel gauge hasn't worked since I got my Jeep around a year ago. It's a 1966 CJ6. On a purchase from Walcks, when I was getting a...
No adapter sleeve that I saw. Just a really rusty piece of metal that I found out was a thermostat housing retainer. There is an old Napa store...
Thanks for the replies. Any idea what a cross reference might be for a 160 degree thermostat for an L-Head? When you mention anything at any parts...
I have a 1946 L-Head in my 1966 CJ6 that was installed by the previous owner. It runs well and was supposedly rebuilt about 13,000 miles ago. All...
Hey Guys. Had some time to tighten it up today. Not bad at all. Tightened right up holding the nut on the top. Thanks a lot for your input. Dave
Hey. Thanks guys for the replies. I was hoping that maybe I could just re-tighten the unit and not have to buy a kit and start replacing stuff. I...
I've found what I've been looking for. I needed a schematic or picture of this part and it's pieces, and how it goes together. Here it is in case...
Hey Guys. I have a 66' CJ6 with the stock Ross steering. The Jeep has 57,000 original miles, and has always had stock, (225's), small tires on it....
I really don't like the wide stance look. I'd much rather have a taller skinnier tire and look. I guess I was trying to justify the idea of a...
I was thinking that a wider tire would give a wider stance, and be more stable or less tippy. Although, it didnt feel at all tippy when my boy and...
Thanks for the pictures. How did the 11.50's help with stability?
Do you happen to have any pictures of your Jeep when you had the 31x11.50's on it? There's some where I live for sale, on some good looking rims...
Ok. I got it figured out last night in my head. From left to right, the tire does grow half an inch equally with each inch of increased tire size....
Hey guys. My oldest boy and I were out flexing the old girl this evening to see how much room there is for a taller tire on our CJ6. It's stock...
Ok. Probably the best way to go. Just make what I have work as long as possible, until I have everything ready for the V-6 and a 4 speed swap down...
The L-Head was swapped in by the PO. Not sure why. They had it rebuilt about ten thousand miles ago, so it purrs like a kitten. If I was to change...
Ok. So sounds like a lot of modification. Lets say I was to find an early Jeep T98 that was factory mated to an L-Head, would that bolt up? Or...
Hey guys. My Jeep is a 66' CJ6. It has a 1946 L-Head and stock T90 transmission and Dana 18. I'd like to put a T98 in it for 4-wheeling for the...
Separate names with a comma.