Mine are the 32 bias TSL's I think they are perfect.
Nice color choice.
I think I'll take mine to a machine shop.
I'm afraid that gouging must have happened on my scout 44. I can't get them to budge with a 8 lb sledge. How'd you get the axle housing in the press?
the only thing that has changed is it now sits in a much smaller garage. i am going power saginaw
I need to put it on some sort of stand and that not happening till the move is over.
That is what I was doing. I hit like a thousand times that way and 5 times the other way. The photo just happen to show the 5 dings. The top photo...
That's what I have been doing. I hit it a couple times as if sliding it off the tube just to see if a crack would appear. I'm using a 8lb sledge...
I was waiting to finish grinding and I need a couple odd ball u-bolts for the diff side Wow. That is a lot of grinding right there. The C is...
Still can't get it to crack [IMG] [IMG]
SAFETY GLASSES or GOGGLES Like everybody said unless the throttle shaft is sloppy, rebuild it yourself
I left my camera at home or I would have posted a pic. I'm going to bring it and some thin wheels with me tomorrow. I'm going to use a grinding...
I am having a hell of time turning the C's. I have ground through the weld into the tube and I have heated the C and beat on it with both 3lb...
different motor mounts. There are some great transmission choices available though but you'll have to look out for the starter placement. FWD...
I'm sure he's talking springs not grill. Looking forward to it Sammy.
I've been wondering what it would look like with the a pillar landing on the step. Looking forward to the install.
Oh yeah, I had been spraying these with PB Blaster for a few days.
I just removed mine. I didn't have an 1 3/16 socket so I used a chisel and hammer to remove the top castle nut. The lower ball joint was held in...
I noticed on Partsmikes site that he has the cj rotors and hubs for only 99. That might be what you need. They are already assembled with studs.
That's right where the first hole is on these. Anybody see a problem running tierod on the bottom and drag link on top? Now I need to score some...
Separate names with a comma.