No such thing as free! That being said, if you have room to store it, I would take him up on it. It has the potential to help him out and help...
Awesome. Thanks for the responses guys! And for the pictures, especially. I think that I'll save myself the extra work now, and rock it without...
I'll have a look at Tarry's build, thanks! I've got stock leaf springs (7) and those are only a year or so old. I actually took all the parts...
Is anyone out there running a sway bar under their Jeep? I've finally got the D30 under there, and I'm just wondering if I try to mount the sway...
Spiderman, It will help you get quicker answers by adding your Jeep to your signature line. :) That being said, you profile says it's a 63?...
My wife was baking last night...and I thought to myself hmmm...that's about the cheapest fix the OP is going to find!...
Thanks for the input and the pictures. As much plate as I can work with, and as large as I can get it to distribute the weight. [IMG]
I wish I could afford a steel tub and just drop that in but, wish in one hand my grandmother always told me. What if I did something like a piece...
It's +/- 1/4" thick along the firewall. Thicker as it gets towards the sides where the fenders attach and about 1/2" at the top of the firewall...
My intent was to do both sides of the tub from just about the center of the tub over. That's from the top of the dash to the floor both sides. I'd...
Thanks Glenn! I guess that's why the preview post button is there? :) I realized what I said right after I posted haha 14ga might be a little...
I plan on sandwiching my fiberglass tub firewall, with sheet metal. Both to support the brake booster/dual master and swinging pedals. The...
Seeing as my axle gears aren't matched, yet. Is it better to run without the front drive shaft connected entirely or should I change the yoke and...
Last time I was in Ohio, Jay at Willys-Overland had a stack of seats about two men high. They're usually quick to respond to email as well.
I'm not quite there on my Jeep but, this document has been referenced on the site a whole bunch. I've read it a couple times, and it seems to be...
I'm currently working on this same project. I planned on doing what Tarry mentioned. It makes the most sense to just move the mounts back a bit...
Quick search pulled this one up......
Are you guys modifying the clutch linkage when you add these pedals? I saw that advanced adapters has a chain driven clutch linkage but it won't...
Was the original f-head just gloss black? Mine has shades of dark green beneath the grease....that Buick green looks tremendous though!!
Man, that's a clean looking Jeep. Was that flaming river column worth every penny? :) I appreciate the picture non the less. It gives a visual...
Separate names with a comma.