When I got my trailer I washed it down and found "REBUILDT" stenciled on the front panel above the hand brake. The underside of the tub was coated...
Here's something I spotted on another forum....
Curious as to what shocks you guys with Meyers tops are running. I have Skyjacker Hydros with the 2.5 " lift and they seem ok, but a little stiff...
Got my seats recovered with new padding about a month ago but never got around to taking pics. I went with vinyl in the same pattern that was on...
I am replacing the head on my '74 258 with a recently rebuildt head,intake and exhaust from an '87 Wrangler. I have a bad lifter and a bent push...
A friend of mine is swapping a 4.0 from an '89 Cherokee into an '87 CJ7. In the process he said he installed the CJ WP onto the 4.0. It ran...
I have a bad lifter. It pumps up when it runs without the vavle cover on but the push rod has a lot of clearance at the rocker after I kill the...
The old running lights were getting in pretty sad shape so I installed some LED lights. These are flush mounted trailer lights and are pretty...
Rewired the Jeep last w-end with the EZ2Wire 14 circuit kit. Backed off putting the CS 130 alternator in 'til a later date. I knew I had more than...
Where are you guys buying your Spartan turn signals or another quality brand switch. I want to put in a new one with a Hazard switch rather than...
A gave me a rebuildable head from a DJ today along with the intake and exhaust manifolds. He says the parts are all off the same engine and are...
I recent posts I have seen a lot of talk about different carbs. A friend recently bought a '68 CJ5 with Buick V6 fitted with a Rochester 2 jet. Is...
Didn't want to hijack the previous thread on rear taillights but wanted to learn more about LED park and signal lights you used on the front of...
Does anyone know if the pinion sleeves for the D30 and the D44 are the same size? I've called around the local parts stores and one store says...
Well, last Sat. a friend helped me install the 2" Skyjacker springs and shocks. I went with the Nitros after reading about the body roll. I knew...
The last trip into the Chocolates was the straw that broke the camel's back for my old leafsprings. I had one break on each rear pack and one...
I'm getting parts and tools rounded up to rewire my '74. I received the Kwikwire 14 STHD harness several weeks ago. I have about three weeks...
Well, after yrs. of being at the mercy of different guys I've hired to do my welding, I decided to buy my own machine. I bought the Lincoln...
You know I really hate to beat a dead dog like this after all the recent threads. I have searched around and maybe found a vender on eBay that...
Does anyone know if a rear cross member from a '76 CJ will fit a '74 CJ ? I need one and want a factory piece. The '76 parts are just easier to...
Separate names with a comma.