I had a big stack of jeep wheels that I bought over the years. Went through them and scraped some that had rust through and worn out lug holes....
I was checking the net the other day and it poped up in the auto parts section. I called the guy and he was working late but we could meet about...
I have been helping this older gent restore his 1948 CJ2A. But something does not look right about it. Here are a couple pictures. [IMG]...
Brought this home this weekend. It was sitting under a old cottonwood tree, (the closest we get to a barn here in NM ) It is a 1949 Willys...
I have been wanting to paint my CJ6 ever since I got it. I did the top 4 years ago, stripped to bare metal. Now is the time to do the body...
Just got back from the shop with my redone seats. These are going back in because the Bestop seat just were not cutting it. Cost $350.00 for...
Help I need to know the measurements on ware the Battery Cover is located on the cowl. I have looked at a lot of picture but nun show a good...
I found this spec sheet in abow with a bunch of owners manuals I bought. I have seen people looking for stock dimmisions. I am sharing this...
I have a frame that I bought with some other JEEP parts and i need some help IDing it. It is from a flat fender, has round front crossmemberwith...
On the 68 Jeepster convertable it has thes lights. I have never seen these befire. Are they stock on the convertable. [IMG] Andrew
This is a picture of my brothers trailer that we built over 20 years ago to pull behind his 1976 CJ5 It has the same track with as a CJ and uses...
I am helping my dad on 67 Commando. It has a 30 rear end with 10" brakes. We would like to change to 11" because all the hardware for the brakes...
I just picked this up yesterday. It is a 1949 CJ3A It has no engine , transmission ot tranfer case. The PO had put in a V8 at some time , he cut...
I have about finished the engine swap on my 1970 CJ6. It came with a 4 cyl and 5.38 gears I have put in a Buick 350, with a 350 auto trans,...
I have a 1970 CJ6 with a Meyers hard top on it, only has the two rear windows on the sides. Loking to put the two front windows in and also the...
I just overhauld my F134. I did most of the work. The oil pressure is about 40psi cold but seems to drop to less than 10 psi after it is warmed...
HI I am new to this. i have a 1970 CJ6 with F134,T90,D18, with 5.38 gears. also warn over drive. I would like to know what RPM the engine is...
Separate names with a comma.