Howdy All, I am getting old and have a pile of parts left over from years of projects. I don't need another four wheel drive vehicle so I...
Okay, quit playing around with that thin stock stuff. Go to a shop that has a press brake, have them shear a piece of 1/4 steel or stainless and...
Howdy, I went with the 3.5 springs, and I think they are to tall. Yes, I would go with the 2.5's, go spring under and use adjustable shocks to...
Steel scatter shields are great for transadapter, used an old one I had from a chevy engine to adapt my Chevy 153 four cylinder to my Ford T18....
Custom only in the fact that I am using a tube frame, but the dimensions are stock, there is no reason to hack the firewall. What I would do is...
Howdy, I just posted three pictures in my Album of Chevy 153 install, under Vhunter. See, if you can see them?
So, what is the problem with installing the Dana powerlock? It is a better unit!
Howdy, if you are going to build your own tank, here is the formula for calculating the gallons it will hold: Hight x width x length x .004329 =...
Personaly, I would put the Jeep back to SUA, as you can get just as much lift with some new springs and not have the problems you are facing now....
Absolutely, that is too much force on a single point mount for a Jeep tow bar. You want the mounting points as close to the frame horns as...
I want to see Warlocks install with pictures, like under the dash!
:uwop:
Yep, I vote to keep it stock, as said before not many stock ones around and would be fun to drive it that way!
Howdy, I did the AA T18 to Dana 20, it was easy to rebuild the T18 and it is more managable size wise and weight wise. I am happy with it, so...
Howdy, I was told by (Parts Mike) that the hubs should be .400 thick, when I asked about maching the back-side. nickmil, do you know if this is true.
Sorry, I missed the pictures. So, is that as far forward as that steering box could go, that drag link looks like is should be more parallel with...
Do you have any pictures of this intallation yet???
Thanks for your advice, but I do not have a 3.0 (eight port head). All I have is the siamise port 153, but I talked to the guys that make the...
Rebuild!!!
I would check it out for a rear bearing going out, you just mite lose the whole transmission. I would not think it would last until winter, you...
Separate names with a comma.