Hi all has anyone ever used one of these. Looks like a great jeep heater. Can be mounted pretty much anywhere. Can you see any drawbacks?...
Hi all, have a basket case 1969 cj-5. I got it as a parts vehicle. While looking at it the steering box looks to be a saginaw of some kind. The...
Look up Henrod 2000 or Cobra torch. Oxy/Act powered tig welder! Also Cuts up to 1".Welds Alum.sst.Cast and steel
www.hermtheoverdriveguy.com he helped me with my O.D. and sells and rebuilds them plus has parts. He's a great fellow to talk to.
Hi I use a Lincoln SP 125. Just remember when switching from gasless to gass you have to reverse the lead polarity.
http://www.buggiesunlimited.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=FACUNV0601 This is for a mini-roof A/C http://www.espar.com/ is...
Got a bit ahead of my self. Alcan orbit eyes have to be built into their springs. Deaver springs have "Baja Bushings" that look to install in...
Hi all. Here is what i'm thinking of. I have a full set of 69 cj-5 leaf springs I would like to put under the 3A. I would like to use Alcan Orbit...
Saw this on the back of a 4x4 the other day. IT was a jerry can that had been split at the horizontal seam a couple inches down from the top. It...
Here is something that the old time dirt track racers used.Instead of welding the spider gears which potentially weaken them, They would pour the...
http://www.rigidized.com/
Hi all. I am useing mid 80's jeep hyd slave and master components to convert the clutch from linkage. My question is when setting my linkage...
Hi all, I didnt take it apart so I need to ask. Which direction does the curved side of the throw out bearing face. Its on a 1969 225 odd fire. I...
Thanks for all the header advice. I am to the point of final placement of the v6. I am useing the mounts from a cj5. The engine is set closer to...
Hi all, I am swapping in a 225 v6 into a 50 cj3a. It came from a 69 cj. I have saginaw steering and it looks like I will have to notch a motor...
I am currently building a 50 cj3a. I have a 1969 225 buick odd fire opened up to use stock 231 pistons. I also used a sm-420 trans with a novak...
Hi, Here is a thought. My uncle wired a set of offroad lights through a solenoid but used the opposite contacts. He put the heavy amp draw through...
Hi all. I am swapping in a 225/t-14/dana 18 into a cj3a, I talked to novak about a rebuild for the t-14 and was told the best thing to do is swap...
have it glass beaded and then shoot it with RUST BULLET. You can find it with an internet search. I just had my entire cj3a glass beaded and then...
Hi all, I just picked up a basket case 1968/69 cj5. It has the 225 v6, 3 speed trans. There are some really interesting fuel tanks installed. One...
Separate names with a comma.