anyone ever have a t/c go bad and what were the symptoms when it did. I just dropped the trany in my 85 auto 3 speed the flywheel has cracks all...
as soon as it starts to get warmed up it starts tapping or knocking it used to only tap in Park now it does it in all gears, like I said in my...
I popped the inspection cover on my 85 yesterday and found the flexplate is cracked where every bolt for the torque converter is and also seems to...
sounds like lowering it from the top is easier, I may wait till it gets warmer so when I take the top off I can leave it off Thanx all !!!
im getting ready to pull my auto tranny in my 85 cj I believe I have the tf-999 in it, and was wondering if anybody knew how much the unit weighs....
oh forgot to ask is there any websites I can go to get a schematic on that tranny??? thanx again
what are the consequences if I continue to drive it this way?? Also its been a long time since ive pulled any trannies is this something I can do...
My 85 cj has the 3 speed automatic tranny in it I believe its the 904, when I first got the jeep it made a tapping or knocking noise only when the...
I dont believe you have a computer on your 73 these guys on here should be able to straighten you out, as far as mine goes the arcticle that dave...
thanx this gives me some direction ill start on it tmrw and let you know what I found. thanx again cw
heres my problem, 1st im talking about my 85 cj with the 6 cyl and the carter carb oh yeah its an automatic. I always have had problems with the...
well tried it out today on my 85 cj which is carbbed and didnt see any smoke ran fine however I didnt check plugs Ill use it all up and then check...
yeah i thought about the plugs I think what Ill do is for one just burn it in the cj5 thats carbbed and ill mix it in with regular gas from the...
I know this might be dumb but im gonna ask anyhow. I recently sold my boat and I have a surplus of premix gas in the garage. Close to 30 gallons,...
yeah thanx im trying to find out what gears I have in it , its a 1960 and i think its a stock axle, doing a search but if anyone knows id...
ive just installed an autometer tach on my 225 now there are little switches on the inside for 2 3 and 4 pulse , right now im set on the 3 pulse...
well i decided to 86 the alternator and regulator for a delco internal reg model. It went right in and the wiring was simple, number 1 terminal...
i did find yesterday a ballast resistor on the inside of firewall that has been bypassed . So i only have the one out by the coil thats inline. Is...
no i didnt how do you do that
my system is the delco alt with ext. regulator which is new . Ok coming out of the main terminal on the alt i get about 14 volts, coming out of...
Separate names with a comma.