I'm STILL looking for a bracket to mount a P/S pump to my 225. I have the 2 pictured but neither will work. Any help out there?...
Thanks, that is exactly what I needed.
I have had a steering damper on my tie rod with the Ross box. Now that I am installing a sagi p/s setup I am not sure if I'll need the damper or...
You can leave the clutch fork and all in the bell housing. Just a note: I bought a transmission jack at harbor freight for about $40. It makes the...
None, I had to raise the radiator up to slide the box forward up against the cross member. Right now the radiator is just resting on the steering...
Wow! $2 whole dollars for the Jeep kit, I want one. Anyway thanks everybody I see how it all works now. I went out and pressure washed the...
I am a little unsure of the concept! Does it take 2 of those brackets and a new shaft? Mine is so gunked up under there I can't tell what is...
I'm going to leave the mount also. Herm's kit is a very tight fit but it looks like it is going to work very well. To drop the box over the frame...
[IMG] Here is the Herm steering box in place.
Thanks I searched but didn't hit that. I knew I'd seen something a couple of years ago. I'll read through it in detail.
My brake pedal has so much wobble in it the pedal hits the V6 Dauntless block. I'm trying to figure out if the assembly can be rebuilt. I'm...
Yes I think I'll leave that on also. I just picked up a "pickle Fork" so I'm ready to go! I'm hoping to just pull the drivers side fender and...
I'm getting set to do Herm's reverse steering conversion. First step being to take out the old column and Ross, tie rods and bell crank. Any...
The answer is yes it is quite easy to do. I cut a slot on opposite sides of the metal sleeve that is inside the steering wheel and then just...
OK, I read all the old posts and realize I am not the only one!! But this thing won't come off with any puller combo I have. SO has anyone tried...
Jim, My 69 with the twist on locking ring type pick up sending unit under the seat tank has a sock on the pickup in the tank. Not sure about other...
Found this when pricing a manifold for my 225. http://www.taperformance.com/index.htm#x
My brake pedal has a "catch" in it about half way through the stroke. Anybody experienced something similar? Without taking stuff apart I can't...
My 69 has a dual master cylinder when did they change from single to double?
Thanks, interesting topic
Separate names with a comma.