Can anyone tell me if the mainshaft bearing spacer on the transmission output shaft (in front of the bull gear in the transfer case) is the same...
Are there valve stem seals on a stock f-head ? I see what looks like umbrella type intake valve seals on the engine I am working on. I thought...
Hey guys, I just swapped in some waggy axles and springs and I need some STEEL 2.5" x 6 degree caster adjusting shims. EVERYONE has aluminum,...
OK, am I missing something, or are Buick 350 flywheels RARE ? I've done some reading and it appears that the 225 flywheel can be re-balanced to...
I've identified my engine as an Oddfire by the casting number (1381623). When I bought it, it had an even-fire rotor in the points type DELCO...
Well, I guess I didn't torque the nut on the hub down hard enough. I haven't put more than 100 miles on it since I re-did the axle and installed...
Hi guys, I'm trying to get my speedo more or less accurate and I was just thinking, I plan on getting an warn overdrive in the future. If you...
Do certain saginaw boxes have more limited internal stops ? I have a really short pitman arm and my box stops at its internal stops before I...
Hi all - I just finished my power saginaw conversion,disk brake conversion, BDS 2.5" lift install, and swap to 33x12.5x15's on 8" rims. I have...
Separate names with a comma.