1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Search Results

Search Again
Page 1 of 8
  1. mikieboy
    Post

    Oem 7-blade Dauntless Fan

    Are there any part numbers stamped on fan? Thanks...
    Post by: mikieboy, Aug 11, 2023 in forum: Early Jeep Restoration and Research
  2. mikieboy
    Post

    WTB Cj-3a Windshield Vent

    I do not think the 3A is the same size as M38. I had to modify hinges, add brackets for adjustments.
    Post by: mikieboy, May 20, 2023 in forum: Flatfender Classifieds
  3. mikieboy
    Post

    71 Jeepster Commando Transmission Swap

    Check out the commando site. Ask questions there, also look for parts there. Jeepster Commando Club of America • Index page
    Post by: mikieboy, Oct 7, 2019 in forum: Jeepster Commando and Commando Tech
  4. mikieboy
    Post

    V6 Still Overheating!

    I had a problem like that. A shroud is what helped my problem. I tried no thermostat, but that did not help. Put thermostat back in and added...
    Post by: mikieboy, May 28, 2019 in forum: Early CJ5 and CJ6 Tech
  5. mikieboy
    Post

    M38a1 Steering Wheel

    Google Steering shaft extenders. Several different kinds and ideas.
    Post by: mikieboy, Feb 15, 2019 in forum: Early CJ5 and CJ6 Tech
  6. mikieboy
    Post

    Th350 Dana 20 Help

    Try looking and ask questions on the Jeepster Commando site. Some good info there. Jeepster Commando Club of America • Index page
    Post by: mikieboy, Aug 3, 2018 in forum: Jeepster Commando and Commando Tech
  7. mikieboy
    Post

    Deredneckdefying The '58

    I would just drive it as is, till it dies or quits, true redneck style...
    Post by: mikieboy, Jun 21, 2017 in forum: Early CJ5 and CJ6 Tech
  8. mikieboy
    Post

    Torque Multipliers, Advice Sought

    You probably would not need a multiplier to remove a nut or bolt, but to torque the nut or bolt back, it comes in handy to use with torque wrench...
    Post by: mikieboy, Jul 19, 2016 in forum: The Tool Shed
  9. mikieboy
    Post

    Windshield Vent

    Here is a link from the CJ3A forum. It shows the vent and the attachment of parts. It has 4 pages. Good pictures of the vent The CJ3A Page Forum...
    Post by: mikieboy, May 6, 2016 in forum: Flat Fender Tech
  10. mikieboy
    Post

    Buick 225 carb choices - offenhauser intake

    This is what I used , FRAM PRA 3566, it about 1 1/2 inches thick. I found a bottom of a air cleaner that fit the carb. I cut everything off the...
    Post by: mikieboy, Jan 21, 2016 in forum: Early CJ5 and CJ6 Tech
  11. mikieboy
    Post

    Parking Brake

    Here is the one I used, all the brackets and hardware to attach the cables. Nice small handle....
    Post by: mikieboy, Jan 18, 2016 in forum: Flat Fender Tech
  12. mikieboy
    Post

    New 1970 master cylinder leaking

    I had a problem like yours, all new parts. Did everything you have done. Finally replaced 2lb valve, brakes were better, but not like new brakes...
    Post by: mikieboy, Nov 21, 2014 in forum: Early CJ5 and CJ6 Tech
  13. mikieboy
    Post

    Captive Nut Help

    Take a look here, about 1/4 down page. http://www.debellajeepparts.com/mbpremier.htm
    Post by: mikieboy, Jun 25, 2014 in forum: Builds and Fabricators Forum
  14. mikieboy
    Post

    69 Commando

    Thats pricey for the condition and looks.....
    Post by: mikieboy, Jun 23, 2014 in forum: Jeepster Commando and Commando Tech
  15. mikieboy
    Post

    Mustang Radiator for CJ2A

    Google radiator hose adapter..Summit and others have it.
    Post by: mikieboy, Jan 22, 2014 in forum: Flat Fender Tech
  16. mikieboy
    Post

    vinyl mat

    I used a truck bed rubber mat. Cut to fit floorboards and back bed. Works great and it is heavy duty.
    Post by: mikieboy, Jul 30, 2013 in forum: Early CJ5 and CJ6 Tech
  17. mikieboy
    Thread

    Water Pump

    Need to replace water pump on my v6. I know the 225 and the 231 pumps are a different length. One is about 3/4 to 1 inch longer. I need the...
    Thread by: mikieboy, Dec 8, 2012, 1 replies, in forum: Early CJ5 and CJ6 Tech
  18. mikieboy
    Post

    M38 battery box?

    Same here, keep battery box. I have a M38 also, original battery box gone when I purchased. Made a box for battery to drop into. On the glove box,...
    Post by: mikieboy, Nov 22, 2012 in forum: Flat Fender Tech
  19. mikieboy
    Post

    Gear oil- GL4/GL5

    The last I bought was from NAPA, Sta-Lube, API/GL-4, Part No. SL24239, One gallon container.
    Post by: mikieboy, Nov 7, 2012 in forum: Early CJ5 and CJ6 Tech
  20. mikieboy
    Thread

    Roll Bar side bar..

    I am seeking ideas on attaching a removal side bar on my roll cage. I have a full roll cage, down bars by dash and behind front seat. I am looking...
    Thread by: mikieboy, Oct 22, 2012, 3 replies, in forum: Flat Fender Tech
Showing results 1 to 20 of 148 Next >
Search Again
Page 1 of 8
New Posts