Thanks for the picture... I like your box....!
I used one of those cheap foam brushes, used fairly thick paint, and made one or two passes in each direction, and a little touch-up and...
I found the old ones today when looking for something else.....OD is 1.002"....but these have been installed and pushed out. They are split(came...
What year is your CJ-5? My experience is only with the 1955....There may be other/different suppliers for later model -5's.. If you search...
New Life canvas also has door frames....then you need to buy the latches, striker plate and escutcheon separately... the thing is, they need the...
I recently rebuilt my box with a kit from Walcks......it's installed so I can't measure the bushings, but they were a tight fit in the casting and...
I have two Beachwood Canvas tops/enclosures..one CJ-5 and one CJ-3a....excellent quality but not inexpensive.. New Life Canvas also makes...
The original Eaton caps had four vents around the perimeter, and a ball valve inside that was supposed to prevent leaking......I used spray brake...
You might be able to save the original. I've had a couple MC's sleeved and these fellows do nice work.. http://www.applehydraulics.com/brakes.htm
That is excellent! Thanks for the detailed picture and the trouble you went through to set it up....! Randy
Thanks everybody for the response! I like Mark's picture of the 65 Tux.....looks like a spacer and a washer....but maybe someone will have a...
I still have the old cardboard glove box liner, but it looks like there ought to be a stop or something in the hole, for the hook to come up...
Midwest Military has them....scroll down, on the left... http://www.midwestmilitary.net/midwestmilitary/m38a1p11.html
It's not new...it is used, bought from Herm...as mentioned...Herm sold me the full set, all of which were marked the same......I've yet to see a...
So just for fun here is a picture of the markings on the replacement gear I got from Herm.....of the four intermediate gears that i have, none are...
The intermediate roller bearings were good...I replaced(for the second time)both the intermediate shaft and bearings in September......I spun and...
Thanks Glenn, I don't know if it was the bore or the teeth or a combination of both....the teeth looked OK to me, but since the bore has that...
Problem Solved!! There is still a little noise but you would expect that...right from starting out in first gear I could tell the TC was a lot...
From the cj-3b page: http://cj3b.info/Tech/SignalWiring.html My 55 CJ-5 did not have turn signals originally but the original wiring harness did...
Thanks for that post!! I believe the gears to be original, and I think you have confirmed it....I've emailed the PO whose family owned it since...
Separate names with a comma.