Any heavy equipment shop will have sae 10 weight oil. Also try the local hydraulic repair shop for the pump info and repair.
how about changing to a 160 thermostat?
Re: Fan Blade Clearence you can switch to a 15" fan or do what i did and put a 14" hayden electric pusher fan in front of the rad.It's nice to...
E mail Herm the overdrive guy he will know it and will have one on the shelf if you need one.His address is on his website.
You can ask any bearing shop to match up your bearing to the full compliment style bearing it has rollers packed tight together all the way...
Not much beats a job well done!
It depends what you want to torque, most wrenches are most accurate in the middle 50% of the range and close enough for the rest.
happy with the 252 as well.
where did you get it?
if they all had that amount of wear you may have a oil pump problem the wear didn't look like it came from the oil journal hole were the dirt...
mine too.
do you have the tube for the linkage the right way?I had a similar problem with mine when i switched to a rod and heim joint system,a quick flip...
it needs to be a 1978 or older to have the ports match up properly.
knock for sure.
mine only had a spring on the outside.
Thats what i have but in stainless.
Whats the colum out of?
Re: keping junk out of radiator I got mine from sdl suspension in Quebec,Canada.1-450-773-1458 but you should be able to get it from the big...
Mine came from a 79 skylark
One more thing vasaline works well as lube and disapears quickly.
Separate names with a comma.