MSC supply or Aronson-Campbell are pretty good places to look for oddball stuff like left-handed taps.
I like your gas strut adaptation for the seat. Pretty cool idea. You said it was a little twitchy in an earlier post. Did you get the...
I really like your approach to this project. Fix the stuff you don't like, or that doesn't work well, but keep it running as much as possible in...
Jealous... I wish my wife was mechanically inclined and/or interested in our Jeep... You are a lucky man. (y)
XJs are not crap. They are simply another blank canvas on which the painter can paint. How artistic the finished product is has much more to do...
That's very cool. Like the center headlight of a Tucker 48.
I am sure that, in the end, you will be glad that you went this route.
Great looking Jeep even before you started. Looking forward to seeing this one get a new lease on life! Looks like you've got a really nice...
That upper shock/spring mount looks like it will be challenging with the space constraint. Based on your other work, though, I'm sure another...
There should be a casting number on the calipers. If you could look for that, it will cross-reference to the GM catalog. SSBC could also probably...
You sure do know how to set the hook, with a teaser like that... Will be watching...
I would think you should be able to find an assortment of springs for a 740 if you needed to. It wasn't all that many years ago that the 740 was...
Sounds like our stories are similar, except that after ONLY 15 years you are WAY further along than I am. So don't feel bad. I've been at it...
I continue to be amazed by your creative thinking and novel solutions to problems. I think your thread is really educating me about possibilities,...
This is a great thread and I am learning a lot. Thanks all. Any suggestions on what are the best stranded glass fillers? I am relatively new to...
I like your fuel line installation. Looks nice and clean and orderly
Might be a good suggestion to put some split loom around that wire bundle that crosses the frame and body mount there above the two fittings, and...
Keep in mind also that straight bars meeting at 90 degree angles will not have sufficient torsional rigidity in a violent rollover situation....
Glad to see you got it on the road, and that it was not anything more serious. When you fix the oil leak, be sure to document for the rest of us....
According to "Fourwheeler" magazine: A traditional Dana 44 axle uses an 8.5-inch ring gear. However, JK Wrangler rear axles use an 8.8-inch ring...
Separate names with a comma.