Ok, now for the jet information. I bought the carb used and it had #45 jets in it. Right now it is running #65 jets and it runs perfectly. I...
I have had the exact same problem with mine. I had a bad electronic module in my HEI. I was getting spark but it was not enough. I thought I...
I have one of those carbs on my 85 CJ7 with a stock 258 with to GM HEI ignition. The carb is simple to rebuild and easy to change jets while the...
Many thanks for the information.
I took another measurement. The distance from the middle of the threads on one tie rod to the middle of the threads on the other is about 33 1/2...
It appears to be about 38 1/2 inches from the center of the holes. Thanks,
Many thanks for the link.
Greetings, I have had a 63 Cj5 under construction for many years. Mostly the project has been shelved. Recently I have restarted my efforts....
I recently found this place surfing the web and purchased some items for my Cj7. The guy was very friendly and the shipping was fast. The site...
Mystery Solved Ok, Jeep jockeys; if you are interested I will let you know how I finally primed my Buick V6. As I originally thought, it was...
Ok guys, I am taking a little break. I couldn't help this nagging feeling that it was something simple. So I went back to the start once again...
Don't think you are off base. One of the things i have considered from the start. There are two relief valves, one by the threads that hold the...
Very interesting. I did replace the gasket for the pickup tube, but it could still be leaking. I am starting to think how I can do what you did....
I built the engine myself. I had the block professionally cleaned, bored and cam bearings installed. Before and during assembly I blew air thru...
I thought about the gear issue, however, I didn't have another one to put in its place and It felt tight with my hand. I didn't want to mess it up...
Greetings all, Its been a long time since I have posted, so please be kind. I started a 63 CJ5 build a number of years ago that, for a number...
I have a 85 CJ7 that I just finished converting to HEI. There is a lot of discussion on the web on the subject, especially the gear hardness...
This is one of those links. http://www.earlycj5.com/forums/showthread.php?t=26417&highlight=mustang+radiator JC
The wheel studs I found for mine are Raybestos 7022B. I didn't have much luck finding the ones listed in the Tech Section. Have fun Jim
I agree that you may not have the right calipers. Here are pictures of mine. Yours don't look very Chebby to me. I can see that the big bulge...
Separate names with a comma.