window washer pump<<<------<<<<<An I still have mine, an it still works!!!I opted not to install it, I filled in all holes in my dash I didnt use.
Shocks wont take out the rough ride(only stop the bouncy, bouncy after the bump) Mine rids like that.I have not heard any advice on softening it,...
window washer pump
Thats outstanding!!!Here is mine. I have had her 6 years.She is for balance, hearing, ptsd.
Is that a service dog?
I used pressure treated wood cut to size to go into the hat channel on mine.Also replaced the rubber pads with a piece of a warn out belt from a...
Over a key, (((((((really?))))) This was my guess also"I don't think they ever matched for any years. Doors, tops and glove boxes used the same key".
Mine had a rattle, it was the lever itself. the shaft was worn. fix was a short bungee..
>>>>>>any good glass guy should have plenty on a roll somewhere.<<<<<<<what he said. I had it done for me, the rubber was not right(that i...
How can the sliding yoke be removed from the front driveshaft? Pull on it, just stuck from some crud on it...If you have time pull the joint apart...
Mine is good now, I replaced the sector shaft(it comes with new brass bushings)I took it to a local shop. they pressed out the old ones an...
[IMG][/URL][/IMG] ShBone, Yesterday at 10:52 PM A word to the wise, my cj had lots of play also, I was concerned so i pulled it apart. An nearly...
((((((You truly have a problem))))))I have a 71, 225 also. Ill swap with you, an when I am am sure its well broken in Ill give it back:) Back in...
keep it
Be sure the dropping restor is wired in correctly.
I guess it boils down to rebuilding the 225 v6 an have the trans. rebuilt at the same time...my frame is great!!!the springs are flat also......
I have a friend give me a "7" that appears to have the same hood an fenders that are on my" 5", My 5 needs moter rebuild, trans. needs work, the...
I saw a add on TV about "Scott mold an mildew" remover, Its sold at lowes. After trying a few others that ace, an Walmart sold (AN DIDN'T WORK!!)....
A few pics of the side mount, it helps take the "twist"out of the case.
Here is a good shot of how its offset, not what you might think.I think its offset to compensate for the weight of the transfer case
Separate names with a comma.