Does anyone know the frt drivers side corner to rear passenger side corner and frt passenger corner to rear drivers corner measurements on a 72-75...
Hi, Curious to know how much work others have put into "rebuilding" their driveshafts. I am putting my 74 CJ5 back together and normally I would...
I pulled out my pilot bushing and behind it was a piece of foam-like material stuffed in the cavity between the busing and crankshaft. Almost...
Which parts of the engine were painted the AMC blue from the factory on a 258? I know the intake, exhaust manifolds and water pump were cast...
I am in the process of tearing down a Dana 20 on my 74 and I am having a bear of a time getting the shift rods separate from the case. I unbolted...
Hey Gang, Just finished rebuilding the T14 in my Jeep with ~70K original miles. The transmission was actually in really good shape and running...
I am rebuilding a T-14 and got the rebuild kit from Rock Auto. I checked with Herm and Novak for a rebuild kit but Herm's turnaround time was too...
Does anyone out there have a recommendation on which brand to choose for tie rod ends? Looking for something that is going to fit right and is at...
Need to buy new rear axle bearings and seals for a 1974 restoration. Only replacements I've found are Omix or Crown. I'm guessing the OEMs were...
This body (pics below) has been siting on pallets for about 7 years. I thought it was going to survive ok since I covered it. Well 7 years later...
Does anyone know the size of the rubber and nylon hoses going from the 2 tank vent ports to the rollover check valve on a 74 6 cyl? I've studied...
I did quick search in the forums and came up empty so I'm sorry if this has already been covered and I missed it...Anyway if anyone is looking for...
Hi there, Does anyone have a picture of how the rear brake line runs from the the junction block to the rear axle hose? I don't need the rear...
Does anyone know what the original color of the T-14 tranny was in 74? Mine has hints of a red color...If red does anyone have a color match?
Strange title I know. What I was hoping to find out was: does anyone know how the rear wiring harness (brake, TL, fuel tank, B/U lights) runs...
So as I rebuild the old girl I am seeing how the factory grounded certain parts of the electrical system. Particularly the motor to frame ground...
What do you guys think of these? I don't think they are NOS but they are close...Only problem is I have 2 lights with the license plate glass....
Does anyone have pictures of a stock 74 engine bay? Looking to restore to original layout but mine was hacked beyond recognition so I have no...
Hey Guys. My Dana 44 is missing its breather fitting. I think it was busted and someone filled it in silicone. I believe that the fitting...
I removed my rear diff (OEM D44) from my jeep to paint it and install new spring bushings. I did not remove the springs from the diff but did...
Separate names with a comma.