...in my 2G, the one under the accelerator pump. Does anyone know the best way to get it out? It appears the wrong ball was put in there and it's...
When airing down? I have 33x10.50 BFG Mud Terrains on 8 inch steel wheels. I was on a rough, washboard desert trail/forest road last weekend that...
Does anyone know what tooth count I'd need for D20/3.73/33" tires to get as accurate as possible? I need to buy the cable and the gear that goes...
I recently installed an MTS under seat tank. The sender and gauge I installed work great... perfectly accurate. But with a full tank, after...
This isn't really tech, but thought I'd pass it on just in case someone finds it useful. While doing my wiring, I thought it would be a good idea...
I'm doing some wiring on the Jeep and installing new relays for the headlights, park lights, electric fan and horn. I bought a terminal block with...
I ordered an MTS polyethylene under seat tank and a 6-to-5 hole adapter for the sending unit. The tank hasn't arrived yet, but the pickup fitting...
I bought an SM420 adapted to what was advertised as a Dana 300, but turned out to be a Dana 20. I'm okay with that though. Here's the thing: my...
...does anyone know of a supplier for this part? Mine is cracking and has gaps in it...thanks!
...In a 69 CJ. I don't know much about the Dana 300, but I see (Craigslist) it's a centered output like my 20. It's mated to the 420 with an...
I have 2 questions that both tie into recent threads. 1) Why is my oil pressure so high? 2) How is it that my PCV system doesn't seem to be...
...there is one available locally, a T18-1B, mated to D20. I think it said it's from a 1970 Kaiser J-3000. Will it bolt up to my 225?
Or am I headed for trouble? Background: I just replaced an Optima Yellow Top (900CCA) with an Interstate battery (850CCA). I bought the Jeep...
...they slowed me down a little today while I put new brake shoes on. The service manual says the "L" and "R" stamped into the ends of them...
I don't have an intermediate FSM, but I do have a D30 front axle in my 69. Is there a torque value for the preload on the wheel bearings? I...
http://www.summitracing.com/parts/usw-70-5855r Funny how things happen. I ordered the 77-78 CJ rotors and the Chevy calipers today to do the...
...with a McRuff shackle. I remember Mike saying these will give 3/4"-1" of lift besides beefing things up. I got so tired of looking at my...
Since there was a recent thread asking about Aircraft Remover, I thought I'd post this. I put a tailgate on my 69 daily driver so the dog can jump...
First, thanks to Blevisay for letting me post this, because I'm gonna need help from you guys on this one for sure. He said he'd move it if it...
...but it's not a universal, its a Willys-Overland pickup truck. Am I allowed to post tech questions here and, if so, which forum would be...
Separate names with a comma.