My 1969 cj body is way to rusty to. Fix, I found a 1974 boy in real good shape. Need to know if it will fit my 1969 rails. 5hanks, Duke Posted...
Going to pick up my 69' CJ-5 Thursday and need to know how wide a 69' is with 31's on 15 x 8 rims. My trailer is only 6' 3&1/2" wide. Thanks...
TBI on a 225, is that possible ? I know Holley's and Edellbrock's and other carb setups work, but was wondering if a TBI off of a 4.3 or simillar...
Have a 69' CJ-5 with a 225 odd fire v-6. I don't want to over carb, the engine runs fine when I'm not having to rebuild the Rochester on it. Any...
just got another 74' project and I.m trying to get the tail lights working. the headlights and front running lights work,but no tail lights. my...
Working on another '74cj and I have the 2wd version of the sm465, Need to know what T-Case will go with this transmission, thanks for any help. Duke
I kinda inexperinced when it comes to lockers, but I got acouple a questions. I got a'74 CJ-5 witha dana-30 in front and 44 out back. Could you...
I'm a little forgetfull I guess. Just got through puttin' in my front drive shaft after my clutch install. Looked up and seen my fuel pump still...
If any bodys just lookin' for something to do to there jeep check this out. Modify your windshield. http://www.tysondesignworks.com/products.html
Just installed a Perfection Clutch in my jeep. Part # MU5472-1. Auto Zone has a clutch to fit my jeep as well. Part # NU5472-1, except it's a...
When talking about diaphragm clutches, what is the difference between raised finger and flat finger style? Thanks for your help. Duke
Need some help on this one. Is there any clearence limits between the T-O bearing and the out put shaft? The one with the new clutch has .040"...
Yeah, it's that time. Clutch replacement. And was wandering if you guys knew of a easy way to get the pilot bushing out without using another...
Well I've decided to go with a hydrolic set up. But now I'm having problems getting the clutch MC push rod to line un with the pedal. If anybodys...
Well today I was pulling out of Lowes parking lot and whent to change gears and the clutch pedal hit the floor board. :shock: Looked in the rear...
Whats the best way to seal off a windshield frame where it sits down on the body? Around the windshield itself it's sealed off just fine. After...
Have '74 CJ-5 with 225 V-6, stock engine with Rochester 2- barrel manual choke. Here latly when I get in a pull seems like the valves are starting...
I own a '74 CJ-5, WITH 33 12.50s. Still got the stock suspension , but the springs are starting to flaten out and the tires are rubbing when I...
Separate names with a comma.