Had this happen one time and the cause was a stopped up jet on the passengers side of the carb. I diagnosed it by the fact when I operated the...
The 51 Willys truck I use to have had the plate like which is on your t-90. The cross member on that truck had the two angled indents on it for...
I did it several years ago in my willys truck. My t-case is the d-18 with the 1/4 shaft and individual rollers, and used Vaseline to hold them in...
I have filled them thru the vent before.
I use STP oil treatment or hi-tack oil treatment. Could probably use knuckle pudding too.
Could it possibly be the oil pick up tube of the overdrive rubbing against the planetary drive gear assembly ?
The port originates at the cam bearing, at the front of the engine. There is a groove cut in the cam shaft to allow the oil a path way from the...
I got one off e-bay last year. I think it was $8.00. I could not even find one at a truck stop.
They are both ross boxes, but are different styles of boxes.
It may be the spark plug is bad. May be that the ceramic part of the plug is cracked.
A new set of spark plug wires will probably fix it.
I do not have any pictures. I did the conversion about ten years ago before I even had a computer. I used the power steering box from a 1971...
That is the same mount I put on my 67 cj5. I removed the rear rivet in the front spring mount and put a long bolt in to secure the front of the...
Had one that did what yours is doing, my radiator was partially clogged. Had it redone at a radiator shop and it cured the problem.
Good job, it looks great!
There's nothing like having something different. I like it.
Looks like to me someone tried to make a divorced transfer case.
I myself would go for the the crank and matched bearings. Most likely you wouldn't have to worry about it again.
Thanks for the quick answers. I think I have a d-20 case that has the oil fill hole on the side like the d-18 has. I'll just transfer the gears...
I've searched and can't find the answer. Can a small bore transfer case be bolted behind a t-14 transmission? I do have a T-86 rear bearing...
Separate names with a comma.