Yes, the vented rotor parts are 1997-ish 4dr Sidekick. They work very well. The 4dr caliper and pads are also bigger. That said, they make for...
Install your new bellhousing and torque to spec. Make sure the block, plate and bell mounting surfaces are clean. Thouroughly clean the index...
16" wheels clear just fine. Some later and aftermarket 15" wheels work. Stock Jeepster wheels, unfortunately, will not.
Jeepster Commandos, too!
I've been running the Tracker discs on the front of my 3B for about 7 months with the stock master cylinder. You will have to remove the residual...
Spoken as only someone well versed in 4-cylinder Willys jeeps could :beer:
Ouch. You made it work after a lot of hassle. Shouldn't have to be like that. I bought a Signalstat from napa for the 3B. Worked perfectly!
Yes, if your brakes are the same size all around, you'll want an adjustable valve for the rears to prevent them from locking up before the fronts.
That sucks. For now, I kept the original master w/ the RPV removed. (It's just a rubber disc, you have to disassemble the master to get it out.)...
I stepped out as soon as I realized what the room was. "His family, he can go through it" was what I was thinking. He told me later on that he...
I was helping a friend clean out his uncle's house in TN years ago. We were working on the basement when we realized the footprint of the house...
Yesterday I washed the 3B inside and out, changed the oil, greased the chassis, topped off the gear boxes, fabricated hose brackets for the new...
Yes, and Indiana the year before. Ohio again soon this year. And yes, o/d. Otherwise, stock until I added front disc brakes this year.
Loaded with parts, tools and camping gear headed out to the 2017 Willys Reunion in Indiana. [IMG] West Virginia scenery on the way home from the...
For 16" wheels, there are limited options. For radials you could look at 215/85R16. They're the right diameter but a little wide, similar to...
You've got it right. 15 lbs of drag with the shim adjustment up top. Don't sweat the lower shim thing. Since you obtained correct preload...
Yes, body color from the factory. Mine are black, but my wheels are too. You shouldn't listen to me. I may be a bad influence.
I don't have calipers long enough to measure. So, I did the next best thing. This is the solid rotor flipped with the hat facing the hub. Still...
More info... After thinking about this today, I went back to check something tonight. The 4-dr rotor fits over both front and rear hubs of my...
I thought that might be the case. BUT, the interweb says Samurai, Sidekick, Grand Vitra and XL-7 are all 5x5.5" thru 2007. The interweb is...
Separate names with a comma.