I ordered this one which is non vented. It came with a paper gasket, but even after replacing it with a rubber gasket it still leaks. I wonder...
I'm not worried about locking, I just can't seem to get one that won't leak! Every vented one I have tried leaks through the vent when off camber...
That link no longer works, is there a part number? I am only coming up with vented caps when I look for a cap.
Can you lower the seat?
The adapter was home made. Three of the 4 bolts lined up on the edge or just outside of the T-5 Bellhousing so I had 1" thick ears welded to the...
I don't have a V6, but i have done what you are proposing with 2 1/2" pipe. I ran it down the right side, and around the transfer case inside the...
If you've got a stock CJ-2A then you have a Dana 25 Front and Dana 41 rear (unless it's really early then you have the D-23 rear full floater). I...
What is the fitment issue? To tall? I have a CJ-6 rollbar installed on my CJ-3A and my Bestop Tiger top fits just fine with it.
I have this setup on mine as well, and it works great. Mine uses the old Warn kit. Never had a problem with the hubs popping out. The only...
Could there be a blockage somewhere? Are you getting any fluid to the steering box? The lack of power assist makes me think the fluid is just...
Didn't realize you already had an in-tank pump in the rear. How did you do that, I thought your tank came out of a '70 CJ-5? I'm running an...
The thing I like about the pictured design is it mounts behind the Jeep and does not take up room int he bed. The pump is another subject. Is it...
I am interested in something like that as well. Please post more details.
Just ran across this today. Love the build, especially the tranny cover. I need to do something like that to cover up my T-98. I second this....
I have a model 51 twin stick in my 3A. The only reason it works is because I also have a T-98 and a Warn OD which gives me enough room to route...
You shouldn't have any measureable clearance, the pads should both be right on the rotor. It sounds like the caliper may be a bit off center....
Here's a couple pictures of the engine [IMG] [IMG] [IMG]
It's a beast compared to the NA setup. It can be downright scary on a dirt road when that turbo kicks in, especially with lockers. It really...
Well, here is my experience with radiators and the 2.3 swap. When I first got my Jeep it had a carbed 2.3 swapped into it and a narrow thin...
Forgot about the battery box. Mine is gone and the battery sits in the rear fenderwell.
Separate names with a comma.