Start by disconnecting things one at a time with the multimeter hooked up. When the meter shows no reading you found the problem. Sometimes a...
Does it stay running after it is started? If so I would check that pump, alot can happen to seals gaskets etc. when they have been sitting awhile...
Look to see if your accelerator pump is working, chances are it has dried out from sitting. Jeff
You can get the sand a a building supply store ,get the kiln dried as it won't clog. Jeff
What size compressor do you have? The ad say's you neen between 6 cfm's to 25 cfm's.With a 6cfm compressor it will be running all the time and it...
Thor went and got sold Saturday sorry. Jeff
Re: VIN Numbers I got this off of the Vin tag on the left side of the firewall,It is also on my registration slip. I thought it was a bit strange.
Re: VIN Numbers If the above is true what is mine:83050 37 371867 That's off of my 71 CJ5 V-6 left hand drive. Jeff
Thanks guys, I picked up the paint today($135.00) that was for paint catylist and reducer which is about a third of what Finishmasters wanted I...
I know this has been discussed to death because I have done a search on the subject but I'm still having trouble determining the stock color of...
You may want to check the dist. rotor to make sure it is for an odd fire, the brass contact on the end that makes contact with the different poles...
I don,t know about the alignment of the planets but how is the starter aligned? I wouldn't be binding would it? Just a thought. Jeff
Dan, A belt sander with a grease stick is the way to go,used to finish the edges all the time this way. They use water belt sanders in glass...
Maybe this site will help. http://www.thedirtforum.com/cfmcalc.htm Jeff
Separate names with a comma.