So my 1975 CJ6 with manual steering needs a new steering shaft U-joint. It is the upper joint. I have found the entire coupling online for $65 but...
http://www.quadratec.com/cgi-bin/sgin0101.exe?T1=52016+00&UREQA=1&UREQB=2&UREQC=3&UREQD=4&FNM=11&UID=2005103108474930
http://www.quadratec.com/cgi-bin/sgin0101.exe?T1=52003+50&UREQA=1&UREQB=2&UREQC=3&UREQD=4&FNM=11&UID=2005103108474930
I am pretty sure I just bought the ball stud alone from Quadratec when I rebuilt my CJ6. I'll have to look for ya'
Thanks folks! I appreciate the info, I am getting more educated by the day! :-)
So, I have opportunity to pick up this:...
Cool idea, if you're into that ;-D
WOW! Thanks a lot for all the help. You guys are a great resource! Now to Ebay a kidney.................:-)
Thanks guys!
(1975 CJ6, lifted, 33's, fiberglass body, fenders and hood, stock manual steering set-up) Welp, took the clan for a nice trail ride yesterday...
Ahhh, thank you!
I have a clear plastic tub with hinged lid under the pass seat. Not secure, but keeps water out. You could take a lockable metal box and bolt...
Thanks a lot for all the info. Since I am a novice on trannies inner workings (only had one apart in my lifetime of 33 yrs) what is a bull gear?
Well said Jim. I was thinking "start with the obvious stuff" also. We sure are lucky to have Tim here, the guy is a wealth of knowledge!...
Hmmmm, according to the off-road.com site: Transmission 1st 2nd 3rd 4th 5th Rev T-98 6.40 3.09 1.69 1.00 N/A T-18 4.02 2.41...
Thanks for the responses so far. I was thinking the T18a would be sweet b/c of the granny low. Sounds like I'll need to change my bellhousing...
According to the info I found at off-road.com, the T14 has a 1 1/8" 10 spline INput shaft and a 1 3/8" 6 spline OUTput shaft mated to the Inline 6...
Currently I have the I6 258 mated with a T14a tranny and a Dana 20 t-case. I would like to swap in a different tranny to achieve a lower gear...
Yepper, u-joints are my vote too.
Good advice so far. When I put my CJ6 together I clamped the front fenders on, bolted the grill in place and fit everything up and shucked it...
Separate names with a comma.