No i didn't change the spring perches
I'm glad you mentioned it. I did weld a square tube between this is a pic from another post about disc conversion but you can see the shackle...
I have changed the set up with proper u bolts. That was temporary. http://i366.photobucket.com/albums/oo108/m38a1/DSCF4836_zpsf727bcf0.jpg...
Thats what i did on my m38a1. http://www.earlycj5.net/forums/showthread.php?61706-yj-springs-on-m38a1
http://www.earlycj5.net/forums/showthread.php?102260-Alternative-parts-for-disc-conversion this is my set up for discs but you can find a few...
sorry wrong click
I would really appreciate it to see some pictures. I'll wait for them. Thanks.
Danstew the calipers brackets are bolted directly on the knuckle outside the spindle but it was made from a piece of steel, the spindle and...
Here is a few pics of the brake booster and one before the installation. Thinks are little tight over there now but i plan to move the air...
Due to another post i started this thread for jeeper friends who can't get their hands to US car parts for brake conversion. I used brake...
When i did the conversion, i did it the opposite way. What i mean is, because i wanted to get rid off the wear out under floor pedals and clutch,...
Alan28 i don't want to hijack the thread so i will start a new thread about disc conversion with alternative parts.
Here is how my set up is. The steering box is from a mercedes which cost about 80 dollars. As you can see the shocks are from the front and is...
Alan, i did the same disc brake conversion on an m38a1. I used suzuki vitara disc brakes and rotors from 2.0L V6 and power brakes from vitara. I...
I was thinking about m170 sway bar because it was mounted to the inside of the spring plate, so i wouldn't have to move the shock to the rear of...
Re: About sway bar The problem begun when i changed the springs and also got totaly 4" of lift from the new hangers for the yj springs. With...
Re: About sway bar I also use the R9000s and i know what you mean, but if something jump out in front of you and you want to maneuver in order...
Hi. After the lift i did in an m38a1 with yj springs, when i turn on sharp corners i have increased body roll. Has anyone add a sway bar on the...
I had a two barrel 32/36 DGAV weber carburetor on a pinto engine mated to a t18a before i convert it to EFI and it didn't have a fuel pressure...
when i start moving either in first or reverse i can hear the rear right axleshaft spin and stops on the hub key. I took apart the hub cleaned...
Separate names with a comma.