I am getting ready to replace the rear axle pinion seal on my 1964 CJ5 What size is the nut that holds the yoke on. The jeep is out of...
I have a friend with multiple old jeeps and swears by the Solex replacement carbs you can get new for about $125.00 You should hear those...
My 64 has reverse on the right and forward. It has a factory T98 and F134 engine. I like it alot. Doug
I have an elderly friend who has pulled his CJ3B over 800 miles each way Elk hunting. He has don it for over 20 years and at whatever speed he...
You have to watch those things on ebay when it comes to jeeps, parts etc etc. Either people dont know what is what or are trying to pull the wool...
Yep, you guys are correct! Early MB military jeeps had the FF type rear axle and can easily be identified by the larger hub. Lots of...
T90 and Model 18 are std Military 1 1/8" pin Doug
Offset is wrong also. It will make your wheel base to narrow. And, to narrow for those KO tires. Doug
If you want the best of both worlds in sand and on the road the only choice is the OD unit. Just bolt it on and go. Although they are scarce,...
Propane is your best bet. It has all allready been figured out. Longer engine life, cleaner exhaust, fuel never goes stale, no junk in fuel,...
Anybody got any pics or the rear of the M100 trailer? I need to know where the stars or star goes on the back end. some say one in each top...
I like the stock set up. Mine has been hanging in there since 1964.
Looks alot like my 1964 CJ5 I named mine Sue after the 76 year old lady I bought it from. She had it since 1987 Doug
I found everything I need in a 1945 dated service manual I had in my shop. It tells every detail, orfice sizes, float level, etc etc. It even...
What should the float be set at on the WO carb. I will check that first.
It is belching out black smoke while driving. We will double check the float level. Choke flap open.
I am going to the Fall Willys Reunion this weekend too. the fellow that needs the carb help will be the guy there with the 1943 Willys military...
Just put on a nice WO rebuilt carb on my L head motor. The motor runs so rich that it belches out black smoke. What can I do to lean it up....
How can you be sure the shafts are good and not some cheap import? Doug
Yep, my 1964 CJ5 has a blank tail gate and says Kaiser Jeep on the firewall. Doug
Separate names with a comma.