Thanks for a quick response Timger. I called MSD about that 8014 cap and it's only for Chevy V6 so that's a no go. You're right about the coil but...
Guy's I've searched the forums and don't see an answer to my question which is: Is there a suitable distributor cap that fits the stock...
I see that Gunner and Jeepers1969 want to see the "Installation" instruction sheets from Whitco so I'll post them here. They're not very...
OK 74 CJ5 Here's the pictures and some measurements you requested. The bracket is just some 14? gauge steel bent into a U to support the bows....
Skippy, Yeah sure I can take a picture and measure the attachment point for the bows tomorrow. It isn't much and you should be able to fab it...
The rig looks great Norm. I've been following your build and have been waiting to see the results. It was well worth the wait. I hope to see you...
I like that chain to the shifter idea, effective, cheap, easy....perfect. Better than the Army method of welding an Eye bolt to the floor and...
Thanks. Yeah, they're the stock seats that I got reupholstered. I had a local guy copy the stock stitching and we used the cheapest vinyl he had....
I too was concerned with the lack of security in my CJ. I built a lockable center console out of a 40MM ammo can. It's pretty simple to build and...
Here's a picture of the wheels I installed on my 72. I believe these are stock and were probably the same for 73. I mounted 7.00 x15 tires on...
Tim Did you have any luck getting the top installed? What did you do to (hopefully) get it installed?
Sorry to hear that your new top is now "your problem". I too had trouble getting my top to fit. Since mine was about 30 years old I attributed the...
Something to be aware when buying sockets is the one (I think) socket that is unique on the instrument cluster. The Amp or charge socket does not...
jb Here's a view of the carrier on my 72. It's different than your's but was an "official" Jeep dealer option. I'm not sure of when it was...
Original one here too. I cleaned it up and it looks like new. It's made of some kind of vinyl not rubber.
I had one of those Omix boots and I swear it crumbled/ripped the first time I used it. I made a replacement boot from a scrap of upholstery...
Since the thread was about the magic caster angle I hesitated to elaborate on my poor alignment experience. Yeah I was Pi$$ED, $49.95 for a toe in...
Thinking along the line brought up by hudsonhawk above you might try this. Add a 22 or 24 ohm resistor in series with the sender. this would give...
I recently put in 4 degree shims on my 72 and t while it really improved the darting I feel it could use a few more degrees. I'm running 7.00 15...
My 72 has a 1 inch spacer that appears stock. See Picture. I'm glad I checked this for you, I see I have a coolant leak. It looks like it's coming...
Separate names with a comma.