Tim Engine Builder? Hmmmm...not sure how to answer that one...but I'll try and explain. Well the machine shop that did the engine work did NOT...
Tim I am getting ~ 50lbs at cold start up and ~ 25lbs when hot. Is that normal for a motor that's had a complete rebuild done? Thanks Mike
Changed the oil and filter....Ran it for 15 mins...No sign of any water/anti freeze in the oil. But I am still hearing clattering on the driver...
I had water (Anti Freeze) leak into the oil....Not sure which one was the culprit...Water Pump or Head Gasket... But after having the machine shop...
Anyone know if a gas tank from 1948-53 Jeep CJ3 would work in my 66 CJ5? A guy on craigslist is listing a new tank from a 48-53 CJ3....Seeing...
Well now I am confused what 15 gal tank will fit. Seems the 15 gal steel tanks for the 1978-1986 CJ dimensions are (25 1/4 x 18 1/4 x 10 7/8) on...
I realize you can repair tanks...but I'd like to relocate it outside the cab...gaining an extra 5 gals of capacity is a bonus as well. Sterlclan...
My father-in-law decided to sandblast the rust off my under seat gas tank to get it ready for painting. Guess that wasn't such a good idea...as it...
Should I be concerned about using a flywheel from a different 225 on my newly rebuilt 225? The rebuilt engine came out of a 1970 Jeepster that had...
Vanguard Forgot to mention I've already installed the dash, hanging peddles, master brake cylinder and hydraulic clutch setup from a 79 CJ5 into...
Thank you for the link.....that works...$10 each. Thanks Mike
Was looking at installing a 92 cherokee Tilt steering column in my 66 CJ5 and would like to upgrade the column. I've already swapped a Sagnaw...
Well, I brought the block and heads to the machine shop. And its been determined the block isn't in very good shape...i.e. it needs to be bored...
I know this has been discussed to death here...I've read a ton of the threads and decided on the 252H...Now I am just wondering where the best...
I've been looking for valve covers stickers/decals for my Dauntless V6 and it seems there is a place called Bear Creek Survey that sells them....
Went to O'Reily's to order a Clutch Plate for my 225 T86 66 CJ5. Kid at the counter said they don't sell the Clutch Plate by itself. It only comes...
Looking at picking up a 70 Jeepster for parts...Primarily for the dauntless V6 engine. My questions is what other parts might be worth extracting...
Well, maybe I need to clarify things a bit..As it appears my reference to "correct" was interrupted from a historical perspective. I am aware the...
I've finally located a Buick 231 V6....An old fella up in the northland is telling me it came out of a jeep. However, he's unable, do to his...
PM Sent
Separate names with a comma.