I need to get some replacement hinges for my 74 CJ5. I have a tailgate from an ealrier model (66), but no hinges that bolt to the rear area. I...
Nevermind, did some searching online. Found my answer. Went ahead and ordered greaseable bushings and bolts.
I am getting ready to install my new lift suspension on my 74 CJ5, the previous owner had converted it to a newer 76+ set up. Figured that out...
Thanks, I was just curious if there was an advantage to one over the other. I will just replace with the 74 type and move fill.
Hey guys, I am going to replace my rear mount gas tank on my 74 CJ5 due to a small hole. I can get a new one cheaper than it can be repaired...
Thanks for the replies guys, I found out from the supplier it is the wrong set for my year. It has been swapped out to 76+
Thanks guys, if anyone does know more let me know. I will call the supplier too and see if they have that info.
Smart thinking, I just went out and measured. The old fronts are roughly 44.5"L and are 2"W, the old rears are roughly the same length and 2.5"W....
Hey guys, I just received the new suspension lift I ordered for my 74 CJ5. I was holding the new ones up to the old ones just checking the...
I have found a replacement air box.
Just got an original filter box on ebay, also got the filter for the hose. Still need to order the molded hose. Thanks for all your help guys.
Thanks Tim, I will keep an eye out for an origianl filter housing. If the hose does not go to the carb, what goes to the carb there? It seems to...
Thanks Tim.
What I was wanting to know is how should that forward hose connect? Is there a valve there or is the hose just supposed to fit tightly into the...
Mine does have power brakes, so maybe this would be better?...
I have a 74 CJ5 with the 232 and I am in need of the air filter housing. I have found this on Ebay, will it work, or do I need to keep looking?...
its a 74 232. The way the PO had it, it had a rubber grommet and ill fitting hose that had been taped up to make it fit more snuggly. The hose...
I am replacing the PCV valve and hoses on my 232. I have installed new rear grommet and pcv valve and hose to manifold. The question I have, is...
Thanks guys. I went ahead and ordered a new one now that I know what it is. Its a cheap part and I am going through the engine now so might as...
Guys, I am replacing the PCV filters and hoses on my 74 I6. I am having trouble finding info on what this part is: [IMG] It goes on the brake...
Separate names with a comma.