I used to live about 5 miles away from Bestop in the Denver area, I lost the windshield posts (vertical bars) for my Supertop, and walked in up...
I've got a 383 stroker in a `62, what I found works and is cheap is this! [IMG]...
Hello all, I'm back! Hey I have a to stay away from the wind when the hard top goes on. The Only time the Lil' Ug sits up straight is when the...
Grinsha, That's the same mount I had but, the PO flipped it around backwards so the bottom lip went under the oil pan and blocked the fuel pump...
We use this mount in the NASCAR Sportman class car I'm the crew chief on. We run it with a Telfon puck in between the mount and the frame mount...
Try a 5 lug Wagoneer, that's where I got my 11" brakes from I think they are pre `71 models, before I went with the newer D44's. One this same...
[IMG] This is what my mount looks like, the 3 bolt holes go to the side of the block where the stock mounts bolt to. Then, like Scott's frame I...
I have a question about the lean, If you take a tape measure from the end of each side of the rear bumper are they the same on both sides? My...
The PO of my `62 used a from plate that is suppose to mount on the 4 front holes in the block where the old `55-`60's Chevy's used. The plate is...
I replaced the speedo with a NOS head after the needle snapped in the bushing going through the face, I also replaced the cable due to running to...
A friend of mine cut a grain shovel down to make a cut out for the dist. I thought it was a little different but, he also used a wheel barrel for...
You could check the exhaust tips, if the engine doesn't burn oil the exhaust tips should be a grey to biege color, white is too lean and black is...
I have about the same setup as SpeedBuggy, with angle iron to hold the rad, but the PO cut the whole box off. I have a 19"h x 22"w x 2" thick...
I don't think those are the ones, the ones on my door are about the size of the space bar on regular computer keyboard. I still don't have a new...
Does anybody have a Kelley Top that still has the little emblems on the doors at are not painted over? These are about a thrid of the way up the...
Zed, Are you wanting to restore the Jeep or just have heat? If you want heat search the local boneyards for a early to mid `70's Datsun pickup...
Wow, I didn't even see a T14 in there either, I guess they desided there wasn't enough interest to keep them pages. But, they still have kits for...
What dauntless_powered, you don't like making the little import cars with the stinger exhaust mad? you can blow it right back in their ears....
We use that trick at the race track on our stock car, it fools the db meter also. :D
Try Novak's knowledge base, there is alot of good info here. Novak Good luck,
Separate names with a comma.