I recently acquired a 94 4cyl 5sp yj Wrangler. The issue I was told from original owner is when starting it, it must be in gear or trans will not...
I am ready to put a new carb on the dauntless. To many issues with the worn out 2 Jet. I am looking for suggestions from those who have been...
I am having problems Finding the type of threads and pitch on the two holes in the exhaust manifold on my 258 inline. [IMG] My goal is to block...
So a few weeks ago I was trailing through my ranch. Drive through a waterhole deep enough to get some water in the floor boards. After about ten...
Alright so my question is..... I just purchased a 225 that has no mounts on the side of the block, I currently have a functioning 134 in my cj5....
I just had a set of hubcaps giving to me by an old timer jeep owner, he says he thinks they came of some different model type jeep:), so he...
I have recently purchased a set of the slotted wheels for a jeep and I haver to go buy the lug nots for them. the question I have is , Do these...
I am trying to understand, they concept of the steering knuckle lube I know the ring and pinion have to have gear oil, and there is not a seal to...
Just wondering what you fellas have used for clips to keep the leaf springs straight. I have seen the clips riveted to one of the spring to...
I have already replaced my 12v anternator on my 57, because it was charging intermittant. 14v at the alt under load 3v with the load off 12.5...
Here is a general overview of my situation, Freshly professionally built 134, new carb that has been bolted to an old engine for about five...
I am trying to find a source for the adjustable linkage with the pivot ball for a single stick transfer case, seem to only be able to find parts...
I was wondering if there is a build book brand superior to others for the factory specs and torques, exploded views with parts descriptions, and...
I have A Tux Park with a factory 134 and the three speed Columb shift, I am wanting to install a 225 v-6 in this jeep. Will the bell housing off...
Got the POR sprayed on Sunday night on the frame, trans crossmember and the skid plate dont know why I need that, it'll be a parade runner!...
Just got the frame back from the blaster last night, ready for POR tonight:D [IMG] greasy fingersmehh [IMG] [IMG] [IMG] [IMG]
I have an f-head that has been completely rebuilt about two years ago(maybe 1000 miles on it) I also have a manual operation gauge, My oil...
Lets see your Engine Paint Jobs, I am wondering about color schemes on jeep engines, so lets see what you got! Half way or complete!
I have searches the threades on paints and engine colors for a while and have yet to find or if there is a definitive color for the hurricane...
On a set of factory springs on a 65 cj5, how would you determin if they need to be rearched? Is there a specific measurment from center line of...
Separate names with a comma.