I just cleared it sorry for not getting back with you yesterday shipping is 24 bucks let me know
Pm sent
So it will work but will need a d300 and what about crossmember, and I'm sure the floor will need to be changed anything else I'm missing and is...
Ok tired of shifting gears and my jeep is used on and off road, I'm putting xj springs under it and moving the rear back 7 inches. My ? Is I can...
So what's the status, what carb/injection, is it running or progress have you made?
Nice job, did you make your own washers for the exhaust/intake I'm looking at doing this conversion later own and currently have the offenhauser...
Yeah I just did 2 inch yj springs with soa, we set pinion angles correctly and dropped the transfer case 1inch(homemade as well) with Tom woods...
We built mine it cost 80 bucks in metal and followed this guys shopping list but made a few changes along the way...
Ok so got more done this weekend, took it to a friend and completed the cage [IMG] [IMG] [IMG] [IMG] And he kept it for the fab of...
O yeah that's just tack welds to hold the pinion angle for now it goes to a friend next week for front cage bam bar and his big welder to lock...
Here's the pics you requested let me know if you need more [IMG] [IMG] [IMG] we cut the drag link on the knuckle side 6 1/2 inches to accept...
I will get some better pics of it when I get home. the passenger side is a Reid racing knuckle I got cheap with the 1 inch block and high...
Yeah we're making quick disconnects for it Here are some more photos got my new Tom Woods drive shafts and really impressed with the work and...
Looks good man are you rebuilding the motor or swapping for something different
Got more done this weekend and all this wouldn't be possible with out the help of my friend Jermy so here is more photos Ok power steering is...
No there 2.5 " lift procomp springs
I have no idea the PO installed it and it's kind of in my way with the rear moved back only 1inch the trus were putting in is going to hit it when...
Got all the new spring purches welded in place and the Reid racing dana44 knuckle for my high steer on and waiting on new driveshafts. Also ran...
Thanks for all the feedback and yes my steering shaft has the joint on the upper end but it has slack in it, so the cost of the new lower bell to...
I know i have been told that borgeson and flaming river are the holy grails of steering shafts but has anybody used the rugged ridge steering...
Separate names with a comma.