I disassembled the 3 spd because it would grind some in first gear and was hard to engage at times. I tore it completly apart, replaced all...
My transmission has been giving trouble going into first gear, put in gear and it sorta chatters or grinds. I push it back into neutral, pull back...
I need a full length cover for a 77 cj5. I took it down to the texascoast and left it under the beach house. It won't rain on it and it does have...
I have a tappet noise in a 77 304. I have never been inside an AMC v8 so it is new to me. I pulled the left valve cover and 2 of the rocker arms...
can someone tell me the original width of a cj5? i am 400 miles from mine, building a parking ramp for it but I forgot to measure the width....
I am thinking of swapping the 304 in my 77CJ for something else....probably a 2.3L Ford.....how much problem would I have getting a kit to install...
I have a lot of slack in my cj5 steering box and I am thinking about rebuilding it. I have a repair manual for it. Are parts available still? It...
On my 77 cj5 I have an odd problem with the left front and left front side marker light and turn signal. The right side and all rear lights work...
can someone post a picture of a cj5 with a bikini top? I ordered one for my jeep but is not clear where the 2 footman loops included in the...
anybody have a good source for speedometer gears? I have recently swapped the 33's that were on my cj for stock height tires. Now my speedometer...
I have posted here a few times asking for advice about different parts of getting my cj5 road-worthy. Here is a picture of what I have gotten...
On a 77 cj5...is there supposed to be a rubber bumper under there some where for the brake pedal to rest against when all the way up? Or does the...
After I got the brakes working on the 77 cj5 I decided to test drive it. It wouldn't start :^( I traced it down to no spark and discovered...
I replaced rear shoes on 77 cj-5 last week, didn't rebuild or replace wheel cylinders. This weekend I replaced front bearings and front disc-pads....
Does anyone have a source for a heat riser for a 77 cj5 w/304? Maybe a napa or jeep dealer part number? Mine is broken in half and I have yet to...
I replaced the add-on adapter plate and endlebrock 4 barrel that PO had put on the 2 barrel manifold. 77 cj5 BTW.....Put a rebuilt ford/autolite 2...
I have a 77 cj5 with a 304....previous owner installed an adapter plate on the intake with an endlebrock 4 bl carb. I want to go back to a 2...
does anyone know if the original leaf springs from a 73 cj5 will fit a 77 cj5? Thanks for any help. Ron
Separate names with a comma.