Speedometer shops can make quality cables for you. I had my cable break, and it took out my 90-degree gear reduction unit. I replace it with an...
I'm running a Detroit Locker in the rear. I had to go Full Float set up with custom axles to do it. It's not cheap.
I have the RR 3.5" SUA with their YJ HD Springs. I'm running 33" tires. The springs do settle over time but are really soft. [IMG]
My Tow Bar has a braking system. [IMG] [IMG] [IMG]
Just a strait steel bar with plastic caps on both ends. Those bows are used on my K-line top. [IMG] [IMG]
My TBI fuel lines run on the same side as my exhaust. Even when I used heat shield tubing, I still get bubbling in the tank when I shut off the...
My crossover is behind the transfer case. [IMG]
[IMG]
Notches. We Don't Need No Stinking Notches. I made my own with half inch plate. I also used rubber tube instead if the Welting.
If you're going to use an electric fan, make sure it's as large as possible to cover the full radiator. This will make it the most efficient way...
It's from an Astro Van. I had the mating surface between the head and the manifold machined off 1/4". The radiator is a custom 3 row copper, from...
Looks a lot like my motor. What year was the motor built? Here's a picture for you. [IMG]
I bought a 1973 4.27 Dana 30. I had to modify mine to get the 6 bolt hubs and disc brakes. Wish I could use your 79' outer with my 4.27 gears.
Advanced Adapters is my choice. Had issues with Herm.
Here's the housing I just bought. It has a flat washer style gasket. [IMG] [IMG]
I had to add .080 aluminum shim to mine, same place.
Brackets are installed and I need new parking brake cables. Used the Diesel Heater to bake the paint. [IMG] [IMG]
I have both brackets drilled and one side mounted. This will be the final location. I just need to take the brackets and paint them. [IMG]...
I made some brackets today. The final position will be at 3:00. [IMG]
44? Yes. I'm going to take the existing parking brake cable off of the main caliper and use it on the parking brake caliper.
Separate names with a comma.