Thank you for looking, let me know if you find one.
Does anyone know the correct thickness of the door glass on a Meyers top?
I need the steel channel that holds the door glass for a Meyers top. Passenger side but I would take a drivers side if that is what you have....
Update on trailer Rims. I finally got the old tires removed and this is what they are mounted to: Trailer Wheel2a by sdcj6 posted May 9, 2022 at...
Steve's cousin says the buyer is not a member
The Jeep has been sold!
The transfer case will be a Dana 300 so an adaptor was pretty much a given. It's for a CJ-6, so length is not too big of a concern. I am just...
That's the information I am looking for. I'll take this one back, he also had a Ford T-18-my choice. Thanks guy's
https://sandiego.craigslist.org/esd/pts/d/el-cajon-1960-jeep-cj5/7450348008.html This is Steve's (CJ6/442) cousin Lee's CJ5 for sale. Not as bad...
I need a little help on this T-98A. I believe it is from a Jeep 715. How hard to adapt it to a 225 V-6? The input shaft length is about 9.5...
from rensjeep website [IMG]
Are these the square shoulder wheels? Again, from the CJ-2A page [IMG]
From the CJ-2A page Actually that is not entirely correct. There were two military solid disc rims. One was the 4" which was also used on the...
Thanks for the information, how do i determine "square shoulders"?
Ok, Got around to removing it so here are some pictures. Large piece is cast and then rough sanded, surfaces then machined. Small piece if turned...
I will definitely take it apart when i get back, it is hunting season so I will be away for about a week. Pictures when I get back. It seems to...
I kind of does. except it is 2 piece. Look at picture 2, there is a wedge shaped piece next to the timing cover filter flange. No visible bolts...
I picked up a core V-6 and noticed the oil filter is a little different than I have seen before. Anyone see an adaptor like this? Dauntless Oila...
Some of the small diameter hubcaps I have seen have an inner ring of smaller diameter, though I can't say I have seen the inside of any early jeep...
Update: Ecinside1 by sdcj6 posted Sep 7, 2021 at 7:27 PM Inside with top removed Ecinside2 by sdcj6 posted Sep 7, 2021 at 7:28 PM Ecinside3 by...
Separate names with a comma.